What are your plans with your re-release RC10T?

[Dangeruss]

I have the CC and 40th as well, but I assume no one wants to see pictures of box-art RC10s.

That's like assuming a crackhead doesn't want to see your pocket full of crack.

[Brendan2904]

I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.

[Frankentruck]

I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.

Did the 10T kit come with the wide front wheels too? Or did you add some vintage fronts?

[Brendan2904]

I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.

Did the 10T kit come with the wide front wheels too? Or did you add some vintage fronts?

Was able to get my hands on some ReRe Gt wheels and tires.

[rknize]

Did you carefully plan this beforehand? Or get very lucky? Either way, fantastic job!

Ha! I wish....

Thanks!

[Dustydrone]

Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts

[GoMachV]

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

the only part that would fit would be the idler in the rear, rear bulkhead, and steering assembly. The entire front trans would not work and of course the driveshafts. The 10T as with the DS are just different animals up front, and not at all compatible.

[juicedcoupe]

Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts

Maybe a buggy with truck conversion wheels.

The wheelbase would be a little short but there are some truck bodies that'd fit.

[GoMachV]

if you were to do a truck conversion, you could use the ten4 in the LWB position with the lwb belt

[Dustydrone]

Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts

Maybe a buggy with truck conversion wheels.

The wheelbase would be a little short but there are some truck bodies that'd fit.

That's a different direction but I like where you are going with this. I did have an RC10 with the Monster Truck conversation back in the early 90s.

Thanks!
Alan

[rknize]

Well that didn't take long, lol...

[RogueIV]

Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg

At least it's getting used out there and not shelfbound for eternity

[rknize]

Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg

At least it's getting used out there and not shelfbound for eternity

Yeah, built this intending to bash it around a bit. It drives and jumps awesome, but the front arms are pretty frail if you hit anything with them. I guess that's to be expected with such an old design. The stock slipper is barking like crazy (which I also kind of expected), so I ordered a V2 for it. These were never intended for brushless, lol.

[RogueIV]

Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg

At least it's getting used out there and not shelfbound for eternity

Yeah, built this intending to bash it around a bit. It drives and jumps awesome, but the front arms are pretty frail if you hit anything with them. I guess that's to be expected with such an old design. The stock slipper is barking like crazy (which I also kind of expected), so I ordered a V2 for it. These were never intended for brushless, lol.

If it's making a barking sound that's probably the diff not the slipper. I'd tighten the diff a little bit and loosen the slipper.

[RC10th]

Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg

At least you missed the bumper