Born from misfit parts from ebay part car buys and Held together with hopes, prayers, copious amounts of CA glue and improper fasteners. Behold, the JRX POS:
90% of parts on this car should have been tossed in the trashcan years ago, but here it is, existing, for some reason. Bent screws, bent shock tower, bent control arms. All the screws in the bulkhead are stripped, hence the glue. 4-40 screw in the nose likely to help with keeping the bulkhead on. Why is there a random aluminum bracket on the right side? who knows, but the screws don't want to budge so it stays and gets the Rx strapped to it.
Some of the only redeemable parts, RPM rear truck arms, and they are only on it because I needed the thrashed rear arms as spares for my actual JRX Pro SE. The hubs are twisted too, not sure how that even happens.
The Diff is Indifferent, it's actually melted together. The motor plate is from my childhood where I decided to paint it. As you can see that held up well
Wheels and tires just random take offs from other projects that looked usable. Track width is pretty close to regulation with the lower offset XX-4 rears and the RPM truck arms, might need to use that tactic later on a better car. The sliders are cut down LX-T units. They work, but look like the rest of the car...horrible.
One of the worst chassis plates I've ever gotten. It has a Red Dog decal on it which I can only assume is a portrait of the dog that mauled this chassis.
No wing, I refuse to waste my NIP wing tubes on this disaster on wheels. Body is another ebay parts bin special. So exotic! it's actually served as a practice, test body for a few of my cars while their bodies were getting paint.
