Yokomo turnbuckle shaft size?

[Frankentruck]

Does anyone know what size Yokomo turnbuckles are? 4-40 or 3mm threads by any chance?
.

.

.

[Dangeruss]

4mm for all three:

From the parts list page of the Yokomo YZ-4 SF...

As printed:

Yokomo Turnbuckle size.JPG (8.84 KiB) Viewed 894 times

Yokomo Turnbuckle size.JPG (8.84 KiB) Viewed 894 times

Translated:

Yokomo Turnbuckle Size Translated.JPG (9.04 KiB) Viewed 894 times

Yokomo Turnbuckle Size Translated.JPG (9.04 KiB) Viewed 894 times

No parts page that listed sd-tb20a so, from teamyokomo.com...

Also from teamyokomo.com...

[Frankentruck]

Thanks.

Bummer, not an option for my needs

[Alex B]

The Yokomo ones I've purchased have all been 3mm I've also used lunsford ones which are 4-40 which is broadly the same when it comes to screwing into ball joints.

[Dangeruss]

The Yokomo ones I've purchased have all been 3mm I've also used lunsford ones which are 4-40 which is broadly the same when it comes to screwing into ball joints.

I saw Techno listing their turnbuckles as 4mm then the thread as 3mm and wondered if Yokomo was doing the same thing.

Other possibilities...

CEN:

CQ0310 is a steel 3x25
CQ0313 is a steel 3x52

Integy:

C29050 is a titanium 3x26
C29057 is a titanium 3x52

Schumacher:

640203 is a titanium 3x20
7318 is a titanium 3x53

Acer:

43721226420472 is a titanium 3x24
43638996861176 is a titanium 3x52

Associated:

1418 is a titanium 3x21
1406 is a titanium 3x51

[Dangeruss]

Ok.... so I cross-referenced the instructions for a YZ-2T:

Yokomo YZ-2T copy.JPG (7.49 KiB) Viewed 876 times

Yokomo YZ-2T copy.JPG (7.49 KiB) Viewed 876 times

Which shows the same "4mm" spec... then I took a caliper to one of the YZ-2T's I've got and the turnbuckle shaft measures out to 2.8mm

...Apparently the US isn't the only one with a standardization problem

[Frankentruck]

Google translate:
.

.

[Frankentruck]

All are 3mm rod turnbuckles
.