GoMachV’s 3d printing thread

[jkelm24]

Pretty awesome Jeff! Keeping vintage alive and well.

[RC10superfan]

The A&L ‘91 prototype looks amazing.
-Do you have any updates?
-Estimates on when it’s being released for sale?

[GoMachV]

Sorry no updates currently. The partner we are using has been pumping out several other molded parts lately so this has been pushed back but it is still planned

[MarkyDents]

Ok first off totally struggled to remember where to find your thread with the prototype car
Second I’m going to be annoying and ask, when !?

[GoMachV]

The place that was all gung ho about doing the molds has been on other projects all year. Going back and forth on a trans case with them now and I just don't know if it's going to work out or not. I'm pretty tempted to just say screw it and 3d print the parts to use up the chassis I had made and go from there.

[GoMachV]

Nothing too special here but decided to make a hump pack case to keep around for a runner. I will add the cells when they arrive.

I also drew up a hollowed out version with the thinking I could have a smaller lipo pack inside basically making this just an adapter case. I'll get to that one next.

[GoMachV]

Just finishing this one up, scaled a rc12e to half size, so 1/24. Should fit a slot car body well. Made a simple tool to trim my foams. Need to make a lathe next lol.

[GoMachV]

I needed a tire truer for the 1/24, so I built one

What a mess
Video:
https://photos.app.goo.gl/uPZVVaT36g62et3c6

[MarkyDents]

That works perfectly !! Now you just have to build an adorably small vacuum as well

[GoMachV]

That works perfectly !! Now you just have to build an adorably small vacuum as well