Rc10 Worlds rere rims for the old worlds car

[Worldsman]

Hello guys,
Does anybody know if the new worlds rere rims are fitting on the old worlds car?

Best regards,
Worldsman

[juicedcoupe]

Yes, they fit fine.

[jwscab]

Yes, however the fronts are b4 offset so you need the offset axles to align properly.

[Worldsman]

Thank you for the Information

[jcwrks]

OG Worlds used 1/4" axles, so you'll need 3/16" cvd's like the B2/B3 would use. You will also need to swap the bearings for 3/16 x 3/8.

[juicedcoupe]

When I first read it, I could have sworn that it said arms instead of rims.

I know it used to be common but hearing rims instead of wheels just sounds weird anymore.

[XLR8]

A rim is a component of a wheel.

Bicycles, for example, have rims that are connected to the hub via a set of spokes. Assembled, they make a wheel.

If you're speaking about the cylindrical part that connects the tire to the axle, then it's a wheel.

Also, it's "anyway" not "anyways". Not mentioned anywhere in the previous post but I thought I'd throw that one in for free.

That concludes today's lesson.

Thank you for your attention.