RC10 Composite Craft Worlds build

[jwscab]

Yup, I can see the difference. Well.... Crap. Sorry couldn't help any more. And I was wrong again...... My chassis has the servo cutout too. So maybe that helps indicate a long/short chassis. Good luck tracking down the solution!

[MarkyDents]

This is one of those times I wish there was some kind of advertising or literature available for Composite Craft stuff….
Why in the world did they make a chassis that’s shorter then the normal wheelbase. If anything I would have figured it to be longer wheelbase like what would have been possible with a tub car even though no one really ran them that way.

[shodog]

is it possible that your top plate is for a 10T? The nose looks much longer than the one I used on my world's build

[Lavigna]

is it possible that your top plate is for a 10T? The nose looks much longer than the one I used on my world's build

quote]

I have a 10T top plate (see first post) and it's much different. Your top plate looks just like mine, in my opinion. Your picture may be a bit deceiving because the front shock tower is covering most of the nose of the top plate.

[SofaKing]

Hey Adam, I never knew there were different versions of this chassis. Can you tell which one I have from these pics?

[Lavigna]

Hey Adam, I never knew there were different versions of this chassis. Can you tell which one I have from these pics?

Hey buddy. You have the long version. The version I prefer. You lucky SOB, lol.

[scr8p]

The longer this is discussed, the more I seem to remember this shorter chassis.

[MarkyDents]

Here’s one that is currently listed on eBay, hopefully the owner doesn’t mind me sharing this pic
Not seeing a servo saver hole in this one.

[aip47-2008]

The longer this is discussed, the more I seem to remember this shorter chassis.

Probably still a part number in an old Stormer add.

[Retro rc]

Here’s one that is currently listed on eBay, hopefully the owner doesn’t mind me sharing this pic
Not seeing a servo saver hole in this one. 9F55B2C1-BE32-4E66-B8A9-EABDFFC38B00.jpeg

Look closer it’s there under the servo saver

[Phin]

The longer this is discussed, the more I seem to remember this shorter chassis.

The shorter chassis thing came up once before.

https://www.rc10talk.com/viewtopic.php?p=427405#p427405

[Lavigna]

The longer this is discussed, the more I seem to remember this shorter chassis.

The shorter chassis thing came up once before.

https://www.rc10talk.com/viewtopic.php?p=427405#p427405

Great find. Thanks so much!

[MarkyDents]

The longer this is discussed, the more I seem to remember this shorter chassis.

The shorter chassis thing came up once before.

https://www.rc10talk.com/viewtopic.php?p=427405#p427405

Wow that had to be tough to find in that thread ! Awesome
And just to make things a little bit more difficult, both the regular or normal length chassis and the short version have servo saver holes here

[MarkyDents]

Here’s one that is currently listed on eBay, hopefully the owner doesn’t mind me sharing this pic
Not seeing a servo saver hole in this one. 9F55B2C1-BE32-4E66-B8A9-EABDFFC38B00.jpeg

Look closer it’s there under the servo saver

Yea I still don’t see it

[Phin]

Wow that had to be tough to find in that thread ! Awesome

Got lucky and found it on the first search. If you don't already do it, using site:rc10talk.com in the Google search terms, and looking through the Images results are both a big help.