Help with a resto build Kyosho FF CRX

The place for all things Kyosho.

Moderators: scr8p, klavy69

Giulio76
Regular Member
Posts: 3
Joined: Thu Dec 10, 2015 6:23 am
Been thanked: 1 time

Help with a resto build Kyosho FF CRX

Post by Giulio76 »

Hi all, been a while since i last posted here... no pandemic back then! Im sure many of you are enjoying new builds or restoring cars that where long forgotten some where :)
Got a hold of an incomplete but unused Kyosho FF CRX, nice little car indeed! Have been able to source most parts that where missing (1 rear axle, pinion, a few screws and bumper; bodies can still be found luckily!). The one things Im missing is SHOCKS, they are of 50-52 mm length, and nowhere to be found, so thinking of alternatives. Ive seen many 50mm shocks, but they are to big in diameter (these ones are small shock bodies, kind of similar to Tamiya rear ones for Sand Scorcher, Champ buggies, but the shock body is over 2 inches (3cm) long, the Kyoshos should be around 2cm length.
So was wondering if any of you have ideas of short/slim shocks I could use, have been looking heavily in aliexpress but no luck... :(
Thanks to all and take care /stay home /stay SAFE ;)
Attachments
IMG_20200410_182955571.jpg
IMG_20200410_191228407.jpg
IMG_20200410_165209397.jpg
IMG_20200410_182808692.jpg

User avatar
Mr. ED
Approved Member
Posts: 5483
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 62 times
Been thanked: 62 times

Re: Help with a resto build Kyosho FF CRX

Post by Mr. ED »

The original shocks are really absolute crap. You have to free them before every run. They just get stuck somehow

User avatar
DennisM
Approved Member
Posts: 2405
Joined: Sun Feb 26, 2012 7:07 am
Location: Denmark
Has thanked: 30 times
Been thanked: 62 times

Re: Help with a resto build Kyosho FF CRX

Post by DennisM »

Pictured is a front shock from a Kyosho Scorpion (not the re-release)
The shock body is app. 10mm shorter than the SRB one and slimmer - 8mm app. on the outside. (I see Phin´s one eyebrow is lifting :mrgreen: )
Attachments
2020-05-16 14.24.59.jpg
Gone fishing

Giulio76
Regular Member
Posts: 3
Joined: Thu Dec 10, 2015 6:23 am
Been thanked: 1 time

Re: Help with a resto build Kyosho FF CRX

Post by Giulio76 »

Hi Mr. Ed and Dennis; thank you for your replies!
I have some Marui Galaxy shocks, kind of similar than those of the Kyosho! Seems they are almost same length too (3 cm approx.); picture below shows manual of the FF with the shocks (roughly to scale) and the Marui shocks and some Aliexpress shocks I bought, on both I've installed the original damper end (which I have, along with the conical small springs of the FF) and they are too long... was thinking about maybe cutting 1 cm from the Marui shock bodies and make a new internal thread (at a machinist... do'nt have tools for that...), or.... make some shock towers out of fiberglass/carbon fibre that I can bolt on the plastic parts of the FF to use larger shocks?
Attachments
IMG_20200516_135744994.jpg

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Kyosho Forum”

Who is online

Users browsing this forum: No User AvatarYandex [Bot] and 7 guests