I recently purchased a well used RC10T. And the motor plate looks like it has been chewed up. The manual calls for 6604, would the RC10 classic 6603 swap out for this part? Or is the motor plate specific to the truck and I need to keep digging for one?
The rere one will fit fine. It’s drilled for both stealth and 6 gear
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Any idea what this motor plate is? I havent come across one before. It seems to be the exact dimensions of the xx plate just different slots cut into it, is it after market? It came with a huge bundle of parts. Think il buff out the scratches and...
Last post
Ah! That crossed my mind! The more i look the more obvious it is :oops: Thanks for info.
Bought a sst on fleabay without the center motor plate, kinda bummed trying to find parts for it being that I live is the US of A. Wondering if anyone knows if I could use a motor plate from a different model.
Until recently I didn't know that...
Last post
I ended up scoring a parts lot. Should be good to go.
I am still in the process of throwing together a runner. I have been machining up a few items for there and there. I am getting ready to mill the motor plate and was wondering if anyone had any pics of how they have done it. I am referring to two...
Last post
Both examples are very nice! I have never seen a chassis narrowed quite like that in the rear. I really dig it. I just don't know if I have the heart to cut the pink chassis I have. I don't have the motor plate in pink so im all about cutting the...
I apologize up front, this may come across as a rant, but I must own stock in spur gears with all that I have chewed up over the years.
Why, on the RC10 motor plate is the bottom hole fixed and the top hole straight? It is near impossible to...
Last post
I'm gonna see how this one works for me....
I just set my mesh a hair tighter than I normally do. ...and then I used a lil longer screws that go through the back of the chassis into the motor plate and used a washer to adjust the length so when...
