
I started out with the used car which will be my racer for now till the class gets going. I added the CRC lowered billet pod plates, some blue anod countersink washers and some misc bits to it but its pretty much stock. I also used a first gen B44 lipo tray and after some cutting I drilled and bolted it to the chassis to accept 2 cell lipo saddles. Ill use strapping tape to hold them down. For electronics I used an Airtronics radio and receiver, Speed Passion Citrix 17.5 system "for now"

Topped it off with a Racers Choice 200mm body!
