Houge and Andy's Early items

Post by **SnoopMaxx** » Tue Mar 09, 2010 12:18 pm

Yeah 5 holes and trailing arms with 6 gear tranny

Post by **RC10WORLD** » Tue Mar 09, 2010 2:37 pm

Any idea where I could find some of that withe delrin

Post by **jwscab** » Tue Mar 09, 2010 2:40 pm

if you mean just white delrin for making your own parts, try mcmaster-carr, or the yellow pages in your phone book for 'plastic'. mcmaster sells a bunch of raw material, and they have delrin/acetal in blocks, sheet, etc.

Post by **SnoopMaxx** » Tue Mar 09, 2010 2:43 pm

Here
http://www.professionalplastics.com/DELRINSHEET-ROD

Post by **SnoopMaxx** » Tue Mar 09, 2010 2:53 pm

Nylon 6/6 is what you want
http://www.professionalplastics.com/cgi-bin/pp.pl?pgm=co_disp&func=displ&strfnbr=3&prrfnbr=85448&sesent=0,0&search_id=398393

Nylon® 6/6 Extruded, Unfilled
Nylon ® - Extruded, Unfilled - Sheet, Rod & Profiles
The exceptional bearing and wear properties of Nylon® make it one of the most widely used plastics in the world. Nylon® is frequently used as a replacement for bronze, brass, aluminum, steel and other metals, as well as other plastics, wood, and rubber.
Professional Plastics offers Nylon Sheets, Rods, Tubes, Tubing & Profiles in dozens of formulations.

# Nylon® - Extruded, Unfilled Features: High tensile strength and modulus of elasticity
# High impact resistance, a high heat distortion temperature
# Resists wear, abrasion, and vibration
# Can withstand contact with chemicals, alkalies, dilute acids or oxidizing agents.
# Available Types: 6/6 (extruded), 6 (cast)
# Available in Natural, Black, MD, Glass-Filled, Oil-Filled & various other compounds.
# Nylon® is NOT moisture Resistant.

Post by **RC10WORLD** » Wed Mar 10, 2010 12:37 am

Thanks a lot guys, very helpful.

Post by **fastang** » Wed Mar 10, 2010 6:23 pm

scr8p wrote:this is an andy's pro race chassis the bulkhead was designed for. notice the front kickup.

003.JPG

Showoff!

Post by **scr8p** » Wed Mar 10, 2010 6:26 pm

it was just for educational purposes. had i been showing off, i would've linked to my "the andy's family" thread.

too bad i don't have them anymore...............

Post by **delsami** » Wed Mar 10, 2010 11:40 pm

i've often thought it would be neat to race a trailing arm car now....

Post by **makotom** » Wed May 13, 2015 7:29 pm

funny seeing that rack pro steering in the first pict. . I made those in the 90s. my old man design them and we made tons of them.

Post by **Phin** » Wed May 13, 2015 8:07 pm

makotom wrote:funny seeing that rack pro steering in the first pict. . I made those in the 90s. my old man design them and we made tons of them.

Were you the owner of Winning Edge?

Post by **makotom** » Wed May 13, 2015 8:42 pm

part of the winning edge and holeshot team. it all went thru my family owend shop. had lots of good times back then. are shop was in a hobby shop. that's what started the whole thing.

Post by **Phin** » Wed May 13, 2015 10:20 pm

Always cool to have members who produced parts back in the day join the site and share their stories.

RC10Talk - The Net's Largest Vintage R/C Community

Houge and Andy's Early items

Re: Houge Prototype items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge Prototype items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Re: Houge and Andy's Early items

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online