Team car refresh and runner
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Team car refresh and runner
Hi guys, thought I'd post up pics and progress through the refresh build of my team car I have recently picked up. Plan is to rebuild and run at a few meets this year and then eventually shelf I think.. Not to serious but hopefully you agreed it's being done tastefully.
Few pictures of what I started with;
I have some build progress I will post later once pics have uploaded..
Thanks
Matt
Few pictures of what I started with;
I have some build progress I will post later once pics have uploaded..
Thanks
Matt
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
Parts in cleaner;
Beginning the rebuild..
J Concepts front tower;
Detail of the clean..
J Concepts bell cranks in black and RPM balls;
More later!
Beginning the rebuild..
J Concepts front tower;
Detail of the clean..
J Concepts bell cranks in black and RPM balls;
More later!
- Bottom Feeder
- Approved Member
- Posts: 320
- Joined: Wed Nov 06, 2013 11:30 am
- Location: Virginia
- Has thanked: 10 times
- Been thanked: 24 times
Re: Team car refresh and runner
What cleaner did you use to submerge all the parts in? Were you planning on replacing the bearings anyway?
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
Hi, the top pot was household bleach.. The nuts,screws hinges etc went into oil. Yea I've replaced the bearings through out the car anyway.
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
Here's a bit more build progress, nearly caught up to real time;
I ordered the wrong transmission brace, I have swapped this from the J Concepts part to a fibre lyte version to match my battery brace.
Wing trimmed and stickered up;
What do you guys think so far?
I ordered the wrong transmission brace, I have swapped this from the J Concepts part to a fibre lyte version to match my battery brace.
Wing trimmed and stickered up;
What do you guys think so far?
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
I've had a shell painted, I was trying to hold off until the car was completed but I'll post them up anyway!
Is the shape period correct?
Is the shape period correct?
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
Thank you. I have a few more parts to source and then change.. Radio install soon.
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: Team car refresh and runner
Cool car and body, Rod likes this!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 5:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 626 times
- Been thanked: 167 times
Re: Team car refresh and runner
Good looking car and paintjob, i l'île it a lot!
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
- MatthewMoore
- Regular Member
- Posts: 19
- Joined: Mon Sep 02, 2013 4:05 pm
- Location: Nottinghamshire, UK
Re: Team car refresh and runner
I've done a little more so the car is pretty much track ready I think..
Full radio install;
HobbyWing Xerun v3.1 esc
HobbyWing Xerun v10 10.5 motor
KO 21007 reciever
Savox servo..
I'm using an intellect shorty lipo that I use in my 2wd competition car.
Body shell cut, stickered up and fitted;
Full radio install;
HobbyWing Xerun v3.1 esc
HobbyWing Xerun v10 10.5 motor
KO 21007 reciever
Savox servo..
I'm using an intellect shorty lipo that I use in my 2wd competition car.
Body shell cut, stickered up and fitted;
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 2019 Views
-
Last post by Mr. ED
-
- 5 Replies
- 602 Views
-
Last post by MarkyDents
-
- 1 Replies
- 459 Views
-
Last post by losiXXXman
-
- 1 Replies
- 564 Views
-
Last post by blown5.0
-
- 88 Replies
- 7940 Views
-
Last post by janaya
-
- 26 Replies
- 3947 Views
-
Last post by Richterat83
-
- 9 Replies
- 1820 Views
-
Last post by Orange
-
- 5 Replies
- 637 Views
-
Last post by joe sumasky