Worlds wheels on an A stamp.

[sschering]

I put the worlds wheels 6805 rear, 9688 front on my A stamp this week.

I think the offset is a little tight in the rear

[DaveM]

Hi,

Do you have any spacers on your axles if you do put all of them on the outside,

I think the new cva's axles are a little longer to take this spacer on

the outside.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEAD3&P=7

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJD&P=7

Dave.

[DHood]

B4 wheels? 1/4" or 3/16' axles?

[sschering]

1/4" original stub axles..

Amazing what you can do with a 1/4" drill bit..

I'll check for spacers.. thanks.

Everything clears but you can't use the outer shock mount hole on the rear arms.

[DaveM]

Hi,

Well there's your problem those wheels are designed to work with the two parts I gave you and

and these hubs.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDZF&P=7

or the conversion kit,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJJ&P=7

Dave.

[sschering]

I"ll probably do the 6802 conversion kit.. thanks for the tip..

Will the 7364 white carriers work with that?

[scr8p]

the new worlds wheels have the same backspacing as an old tq wheel. so i really don't understand why there is such an offset issue on the back.

they don't really look like worlds wheels though......

[slotcarrod]

He looks like he has B4 wheels on the car, he needs these: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJL&P=M

[sschering]

Damn you are right .. These are 9689 wheels..

I'll go back to my cave feeling stupid now lol.
I didn't glue them so nothing lost but $5..

I also have a full set of Jconcepts wheels in white I could use if I convert the stub axles to 3/16. I bet they are the wrong ones too..

I only paid $16 shipped for the ties and wheels so it's not all that bad.

[DaveM]

Hi,

Yes 7364 white carriers will work.

Quote" A person who never made a mistake never tried something new!"

Mistakes aren't failures it's called experience!

Dave.