They're new .71" shock bodies.JK Racing wrote:Are the front shocks .89 B4 version 2? If so, is this a "new" front shock tower?
#6002 - RC10 Worlds Car Kit
Re: #6002 - RC10 Worlds Car Kit
I did read through the whole thread here but maybe I missed it...has there been an approximate ship date on these yet?
-Joe
-Joe
Re: #6002 - RC10 Worlds Car Kit
Tower's website shows "Mid April".
joeman37 wrote:I did read through the whole thread here but maybe I missed it...has there been an approximate ship date on these yet?
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
-
- Approved Member
- Posts: 51
- Joined: Sun Oct 13, 2013 4:12 pm
- Been thanked: 2 times
Re: #6002 - RC10 Worlds Car Kit
Here ya go!foots wrote:Hey Tim how about some pics of your car?
- Attachments
-
- 20140129_174448_compressed.jpg (27.06 KiB) Viewed 665 times
- 20140129_174448_compressed.jpg (27.06 KiB) Viewed 665 times
-
- 20140129_174054_compressed.jpg (30.71 KiB) Viewed 665 times
- 20140129_174054_compressed.jpg (30.71 KiB) Viewed 665 times
-
- 20140129_174045_compressed.jpg (26.97 KiB) Viewed 665 times
- 20140129_174045_compressed.jpg (26.97 KiB) Viewed 665 times
-
- 20140129_174021_compressed.jpg (26.13 KiB) Viewed 665 times
- 20140129_174021_compressed.jpg (26.13 KiB) Viewed 665 times
-
- 20140129_174000_compressed.jpg (24.92 KiB) Viewed 665 times
- 20140129_174000_compressed.jpg (24.92 KiB) Viewed 665 times
-
- 20140129_173951_compressed.jpg (25.17 KiB) Viewed 665 times
- 20140129_173951_compressed.jpg (25.17 KiB) Viewed 665 times
Tim Tunnermann
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
Re: #6002 - RC10 Worlds Car Kit
Thanks Tim, if you would like an outside critique of your setup, I can pm you the address:) sweet ride!!
I'm not like them, but I can pretend...
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
- GoMachV
- Super Member
- Posts: 11376
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 836 times
- Been thanked: 2497 times
Re: #6002 - RC10 Worlds Car Kit
Don't get me wrong, I'm pulling for the horse!scr8p wrote:that car would look great with white front arms.
just sayin'....
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
-
- Approved Member
- Posts: 51
- Joined: Sun Oct 13, 2013 4:12 pm
- Been thanked: 2 times
Re: #6002 - RC10 Worlds Car Kit
Haha....Point taken. I have bought up the demand to the powers that be and we'll see if we can get a run of white arms done....but don't hold your breath!scr8p wrote:
don't worry, i'll drop it as soon as they become available.
So far I have gotten the car to work pretty well on med-high bite indoor clay. I have made some modifications to the inner camber link locations. The front is out on the tower and the rear is 2mm lower than the stock inner position. I am also running the long wheelbase.Bong024 wrote:Thanks Tim, if you would like an outside critique of your setup, I can pm you the address:) sweet ride!!
I think the next things I would like to try are adding ballast weight to the nose, making wide trailing axles and lastly more rear toe. However, I think the biggest hurdle to over come is how the car jumps, and making it a little more forgiving. Although, a lot of that can be attributed to the short arms. I will try adding .030" of drop all the way around.
I'll continue to try and work on setups for the WC, but I also have testing I want to do with the B5's...
Tim Tunnermann
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
-
- Approved Member
- Posts: 958
- Joined: Mon Oct 05, 2009 10:59 am
- Location: Manila/Singapore
- Been thanked: 2 times
Re: #6002 - RC10 Worlds Car Kit
Me like the gear cover, no more drilling for B4 gear cover..
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius
― Confucius
- Phin
- Approved Member
- Posts: 2736
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 65 times
- Been thanked: 187 times
Re: #6002 - RC10 Worlds Car Kit
Patiofurnituregt wrote:Haha....Point taken. I have bought up the demand to the powers that be and we'll see if we can get a run of white arms done....but don't hold your breath!!scr8p wrote:
don't worry, i'll drop it as soon as they become available.
Could do the white arms on the Graphite Team Car re're.
- Johnboy72
- Approved Member
- Posts: 713
- Joined: Wed Sep 15, 2010 11:08 pm
- Location: Waynesville, MO
- Been thanked: 8 times
Re: #6002 - RC10 Worlds Car Kit
Well the issue I see is we could always dye them black if we needed more black parts... White just makes more sense I would think. Gives the customer the option of any color possibility. Plus the classic is white parts. Would look stupid with a set of black front arms.
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
Re: #6002 - RC10 Worlds Car Kit
hey, all you can do is ask.Patiofurnituregt wrote:Haha....Point taken. I have bought up the demand to the powers that be and we'll see if we can get a run of white arms done....but don't hold your breath!scr8p wrote:
don't worry, i'll drop it as soon as they become available.
i just see them as the missing link to be able to use the classic kit/parts to create a modern version of a 6 gear or stealth c.e., or build up a team car using the black ano parts.
- flipwils11
- Approved Member
- Posts: 1904
- Joined: Sun Feb 14, 2010 10:30 pm
- Location: St Paul, MN
- Been thanked: 15 times
Re: #6002 - RC10 Worlds Car Kit
Yay! So true.slow_jun wrote:Me like the gear cover, no more drilling for B4 gear cover..
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1232 Views
-
Last post by sandkil
-
- 4 Replies
- 3449 Views
-
Last post by scr8p
-
- 6 Replies
- 1154 Views
-
Last post by XLR8
-
- 7 Replies
- 773 Views
-
Last post by AndrewCooke
-
- 2 Replies
- 918 Views
-
Last post by ASC6000
-
- 0 Replies
- 1717 Views
-
Last post by mytimac
-
- 13 Replies
- 1846 Views
-
Last post by XLR8
-
- 1 Replies
- 945 Views
-
Last post by scr8p
Who is online
Users browsing this forum: No registered users and 3 guests