I face palmed too when I saw this. Someone else had assembled the transmission for photos and the press release was never passed by me to review. It's always frustrating when careless mistakes are made.
The release was also missing the announcement of the new molded gear cover, that can accommodate the B4 topshaft.
Tim Tunnermann
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
Tim, THANK YOU AND ALL THE AE FOLKS!!!! I was excited to hear about the world's car but now the stealth parts with the upgraded topshaft. Perfect timing as I'm getting low (by my standards) on stealth stuff and continue to find cars. Two days ago I told my buddy I'm about to run out of complete trans for projects and thought I'd have to settle with some mock up stealths. Now I hope that price drops a little.
Since the weather continues to be garbage, I decided to go ahead and build this one. While none of it was hard, several things were more aggravating than I thought.
20210708_190851.jpg
Put the optional gearing (8.3:1) in the transmission and...
Last post
I think its probably a little brighter than that. But you can experiment with different backing colors on some scrap lexan.
This car was backed in white, before covering it with black. A silver or grey would darken it up a little, but I think...
the reedy race is around the corner and i am looking forward to watching it on Liverc.com. I hope the show the vintage class. I don't know if this is any indication of what to expect but:
cliff lett, masami, rick howart, neil craig, Brian...
Just ordered this kit from AMain, also picked up another 1060 HW ESC for it. The manual says 30 to 22 turns brushed motor for this model. The LeMans 490, 30 T motor, is what's shown being used:
I bought this motor for $20, and can't find any...
Last post
Thanks !
Wonder if you could spray the sidewalls with clear plasti-dip to get the lettering to last a little longer...
I could see swapping wheels and bodies just for fun... Kyosho wheels, stock style dune buggy... dropped with a different Beetle...
After a very very pleasent welcome from very very nice forum members I want to show you my finished RC10 runner for 2014. It`s a hybrid between a team and worlds car with some - not too much - modern stuff.
ESC: LRP ICS
Servo: Ko Propo PS-1012FET...
Last post
Hi helios1, 85Edinger, stickboy007,
thank you very much for all compliments!
@helios1: I`ve cut the nose plate and chassis sides on my own. Both sides are cut down to 18mm. I`ve included some pictures.
So this is how it ended up.
For now it´s got narrowed 2,2 truck rims at the rear.
Hopefully I´ll come across a set of 2 or 1,9 rims with the right offset.
Hi guys. I searched, and cant seem to find.. How did you guys make the rear suspension to not be a sticky notchy? I loosened everything up, and tweaked it, but it keeps tightening up all sticky and notchy.
Also, Ive got my front shock towers...
Last post
Allright, I had the short side hinge pin holder upside down for 1 thing. Ive got the axle lock mostly reduced, and I think with running it will wear in just fine.
Still,, hows everybody dealing with the front shock towers fit on chassis rails, and...