#6002 - RC10 Worlds Car Kit
- atarit3
- Approved Member
- Posts: 173
- Joined: Thu Jan 20, 2011 10:19 am
- Location: Yuma, AZ
- Has thanked: 1 time
Re: #6002
some pics pics circulating around..
"To finish first, you must first finish"- Rick Mears
http://www.facebook.com/YumaRCRaceway
http://www.facebook.com/groups/rceofyuma
http://www.facebook.com/YumaRCRaceway
http://www.facebook.com/groups/rceofyuma
Re: #6002
I'm not Slotcarrod, but when I boil parts, I bring water to a boil on the stove, put the parts in a pan or tray (not over a heat source), and pour the water over the parts so they're submerged. The water stays quite hot the whole time. I've heard that near-boiling water is better than boiling water. I don't know about that, all I know is that this has quite effectively made my old parts more flexible and stronger.shane wrote:slotcarrod,
Boil for how long?
. . . you have Associated Green Slime for brains. And not even new Green Slime, but old gooped out Green Slime.
-
- Approved Member
- Posts: 204
- Joined: Wed Apr 25, 2007 5:37 pm
- Location: Binghamton, NY
- Has thanked: 3 times
- Been thanked: 10 times
Re: #6002
slotcarrod wrote:
Just boil the parts in water! This will make them nice and strong again! An original runner is still better than a rere!
boiling parts still isn't a new kit... i boiled my team car and it helped, but still isn't as durable as a new parts. A used kit from the 90's ain't as nice as new kit.
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: #6002
About 1/2 hour is what I do!shane wrote:slotcarrod,
Boil for how long?
![Cool 8)](./images/smilies/icon_cool.gif)
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Re: #6002
This so sweet. I got my pre-order in and as far the rear bulkhead I have a new worlds bulkhead and RPM bulkhead waiting for her when she comes home.
Javier -
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
- Phin
- Approved Member
- Posts: 2736
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 65 times
- Been thanked: 187 times
Re: #6002
Is that a molded black plastic gear cover ![Question :?:](./images/smilies/icon_question.gif)
Edit: Just looked up the B4 gear covers....didn't realize that AE switched to black gear covers on the new cars....thought they were all still clear lexan.![Razz :P](./images/smilies/icon_razz.gif)
Also looks like they made white rear hub carriers for 3/16" axles. Guessing it's 1.5 degree mounts + 1.5 degree carriers.
![Question :?:](./images/smilies/icon_question.gif)
Edit: Just looked up the B4 gear covers....didn't realize that AE switched to black gear covers on the new cars....thought they were all still clear lexan.
![Razz :P](./images/smilies/icon_razz.gif)
Also looks like they made white rear hub carriers for 3/16" axles. Guessing it's 1.5 degree mounts + 1.5 degree carriers.
- Minisforever
- Approved Member
- Posts: 135
- Joined: Wed Nov 27, 2013 2:12 pm
- Location: Flint mi
Re: #6002
I hope these are not going overpriced repops, Because I think TT/ associated could easily create a class for these. Priced right with plenty of spares and lets all go racing!
Re: #6002
$279 for them. $245 at Tower if you are a Super Saver member.
Minisforever wrote:I hope these are not going overpriced repops, Because I think TT/ associated could easily create a class for these. Priced right with plenty of spares and lets all go racing!
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
Re: #6002
I am kind of glad I waited on building my Classic now. I was torn between building a shelf queen or a runner. Now my personal dilemma is solved! And I think it will save me a bunch of money in the long run since the upgrades offer a lot better starting point for racing. My local track is almost all SC trucks and the buggy class has two or three cars and one is normally a 4wd and they run with the 2 or 3 stadium trucks that show up. I will run one of these just for fun with those guys.
-Joe
-Joe
Re: #6002
I had to look twice at my order...but it has a big red outlined box with big words at the end that says the $75 off $500 order will be applied when items SHIPPED reach $500. I swear I must be blind because I looked at the order screen for 5 minutes before I saw where it said it. In the top part where it totals everything it doesn't show the discount. Kind of confusing how they do it.Johnboy72 wrote:So stupid question, but can only use one coupon per purchase. Like I want to pre order two so just use the 011T7 code? Cause it's not showing $400 something. More like $559. Or does the amount change when they charge me? I always forget about the coupons and have never used them. As a matter of fact earlier I pre ordered two, then saw the comments on here. Sorry for the stupid question.
-Joe
Re: #6002
For some that are curious about using a coupon code multiple times, it let me do it. I ordered a B5 kit early last week and ordered the worlds kit yesterday using the same discount code. Also I didnt find anywhere where it says you can only use it once like you do with Amain. Anyone can correct me if I'm wrong.
Javier -
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1233 Views
-
Last post by sandkil
-
- 4 Replies
- 3449 Views
-
Last post by scr8p
-
- 6 Replies
- 1154 Views
-
Last post by XLR8
-
- 7 Replies
- 774 Views
-
Last post by AndrewCooke
-
- 2 Replies
- 918 Views
-
Last post by ASC6000
-
- 0 Replies
- 1717 Views
-
Last post by mytimac
-
- 13 Replies
- 1847 Views
-
Last post by XLR8
-
- 1 Replies
- 945 Views
-
Last post by scr8p
Who is online
Users browsing this forum: No registered users and 6 guests