The shell has to be specific to the T2. The wheels from a GT or T4 will work. I could be wrong, but I don't think the T2 ever came with 3/16" axles, so make sure you get 1/4" wheels for it. Most GT wheels are 1/4", but some are still 3/16".
I just noticed in your pic the universals, they appear to be 1/4", very nice, I would love to have a set of those for my GT. Did you drill the extra holes in the front shock tower?
carloco8 wrote:I think the T2 was the first to have 3/16 axles, so he should be ok. Also, Towerhobbies still sells the T2 body if you need one.
You are right, I was confusing 1/4" and 3/16". Duhhh..... The ones he has are 3/16". When the T2 came out they switched to the 3/16" on the FTGT, then not long after did-away with the 1/4" all-together.
I had a few days off work so took the opportunity get on with some of my R/C projects which included making a start on my new-build JRX2.
First, I dug out all of the parts that i've collected over the years. This collection was started following a...
Last post
Sorry chaps! I've only just noticed that this thread got 'bumped up' - unfortunately JRX2 No.3 kinda stopped along with that last post about a year ago.... all the parts are residing in a box ready to be assembled into a car..... which probably...
Now I'm not a big fan of nib collections, I just don't see the point, never have done, until this arrived today. 8)
The fact that it's near perfect, 25 years old, and Senna's car, makes me want to keep it as it is, but that does kinda go...
Last post
Hi - given the age of this thread this may be a long shot but I’d hugely appreciate scans of the manual if you happen to have it still, please? I finally retrieved my kit out of the storage unit it was in for many many years and all the parts are in...
i started working on my next what's old is new car, this time using a tub chassis. this will be built for the v-nats, whatever year it is that i get there again. being as though i've never been a 10t fan, i decided to sacrifice the only 10t i have...
Last post
Another little update.
Got a set of M4 Proline Primes for this. Seems to be what everyone runs at the track we go to. The car is still working pretty well, I'm fairly happy with it. Current shock setup:
Got this on eBay last week . It arrived in good but dirty condition. BBS wheels and proline tires. Has unpainted Mercedes body also which I won't be using.
Got most of it torn down . Trans is gritty and rear of chassis tweaked . I was able to...
Last post
Yes ur prob right . I've never had on road car so not used to them at all
I recently aquired a bnib 6010 edinger kit and am just torn between assembling and shevling it or keeping it in the box and keeping all the baggies unopened. I meen it is just too cool sitting there in the box unbuilt. But it would alao be awsome to...
Last post
Late Edinger
$250 is a great price for what you got :wink:
in an unrealistic world... it would be cool if we could all get together and have a build off. start with a nib (vintage) rc10 and see who could build it the fastest and have judges rate it based on how well it was assembled and how much care was...
Last post
I'm pretty sure it was aconsola. I'll bet that there's more than a few people that could pull it off.
nope, wasn't me. but i do remember the post. IIRC, he had the sub assemblies like shocks and gearbox already built and just bolted everything up.
Hi guys this is a kit i got on ebay few weeks ago was started by the guy i got it from & not finshed, the car you see in photo is one a picked up a while ago with a few Fasttrax Millennium parts, so i'm looking to build up the new one with the...
Last post
Hey EvolutionRevolution thanks, think it came out well. :D
The Cross C-hubs look good, had to put a spacer in (you can just see blue spacer in photo) to much slop with out it. I used the 0 deg c-hubs think they do a 5 deg ones as well & i had to...