First RC10 Team, it's going to be a racer!

[Percymon]

Don't be shy get them on here!

Terry SC on oople has found them on CML shopatron site so will get them from there

That's good as i got another set of tubes from the link i posted, along with some other bits n bobs

Not sure my build(s) are worthy of showing here, but since they are on another forum I'll duplicate them when i get 10 minutes

[Headling]

We have progress!

Parts out of peroxide and had a good afternoon so far!

[Headling]

More progress today, shocks re built with new o rings and springs

Few bits added to chassis, aerial mount etc

Also made up new wing wire and B4 Proline wing



I'm going to add a B4 layshaft and slipper to the gearbox, are there any other parts required for this conversion? I.e layshaft spacer?? Any other bits needed?

[REMJ666]

Nice Team car

[Headling]

Bit more progress:

Gearbox built up with B4 layshaft and trinity light weight slipper



Now in the car:



Added rest of the turnbuckles and carbon covered the battery strap.

One quick question, tried my lipo stick pack in the car and it's 3mm too long, do you move the front battery holder and re drill chassis? Or dremel the insides of rear bulkhead??

[clm]

you could always just modify a front battery cup by removing the front wall of it. If you are worried about the battery slipping forwards, perhaps a bit of velcro or maybe a bit of slip proof shelf liner between it and the battery?

Chris

[Headling]

Thanks for the advice on the battery holder Chris

Look what turned up today in the post!

[Percymon]

Nice fibre-lyte pieces - I'm using the early design towers on my runner, but the same battery stay and rear brace.

[Headling]

I was not sure what to go with on the shock tower design but preferred the look of the newer style towers

More progress!

[Headling]

Here is is all done!







Just waiting for my viper body to turn up from A main then install the radio/esc etc then it'll be off to my local race track for a shake down!

[Percymon]

Very nice project

[jaro]

Looks like it turned out well, nice work

[upforit365]

What rear wheels are you using?

[Headling]

Thanks alot guys, glad you like it!

I'm very pleased with how it turned out.

It's running Proline B4 wheels btw

Next up radio install then get my shell painted, I'll keep this thread updated with race results etc

Can't wait to race

[REMJ666]

Good looking car...Good luck with the racing...