Well, judging by the amount of cleaning your gonna be doing. I'll go ahead and recommend a ultrasonic cleaner. I bought one the other day from harbor freight for $30. I'm literally just dropping dirty parts w/o any cleaning and pulling them out a few minutes later nice and clean. Really helps get stuff out of hard to clean places.
I have lots of new hardware coming for this and a new front worlds tower. Also came with a Novak HP1 speed control and a Trinity Joel Johnson signature series mod motor.
Hi guys new to the site hi. I have just purchased a rc10 t after always wanting one
So the one I have looks In good condition the plastics are yellow I plan to whiten these ( any reccomendations are welcome ) and to powder coat the tub .
Also I...
Last post
Hey thanks for the info will the gt diff rebuild kit service the 10 t also
Will a set of replacement diff out drives fit the 10 t as I'm wanting some
For the build the truck is coming along nicely have had the pan powder coated
And whitened the...
it has been a while since have posted in this great forum, but now i have a little time to share my RC10 Worlds Car.
I have bought it on Ebay about a year ago, and have changed quite some things on the car.
It came in good shape, but i...
I got hold of an original RC10 Worlds (EUR 50, quite the bargain). I'm still torn between making it a shelf queen and building a runner for occasional low-traction track outings with a 13.5 T. Perhaps you could answer some of the questions below....
Last post
1. Soak all the nylon parts in water for a couple days to rehydrate them. The graphite parts should be fine.
2. You'll have to make the call on the o rings. They could be a few years old (re-re) or 30+ years old. If they feel okay, I'd probably...
I figured I would start a build thread on my 4-10 Legend 4wd RC10. Any questions or comments are welcomed. I have not done a build thread on here, so here goes nothing. This will not be a 100% correct restoration due to parts being very difficult to...
New forum member. I was hoping to get some advice on restoring an old gold pan RC10 back to running condition. The car is in good condition with Novak electronics and looks to be a pole position brushed motor. Tires are dry rotted from sitting over...
Last post
The 's' (as in 2s) are the number of cells, each are 3.7 volts, so a 2s battery is 7.4 volts (equal to the old 6 cell 7.2 nicd/nimh). The mAh is the capacity of the battery, the higher the number the longer the run time (also adds weight). The 'C'...
Just got finished with the tear down and rebuild of my new acquired RC10 Worlds. This buggy was in pretty good condition when I got it. Just need to finish the electronics.
RPM 91 worlds suspension will be going on this car. Made the braces today, plan on chopping the sides Siebenelch style. Figured it would add some strength.
More pics to follow as I get progress made...
Last post
That would be a RPM RC10T bulkhead that has been dyed black.