need a favor...............
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
need a favor...............
can anyone with a b4 measure the distance from the center of the left rear outer hinge pin, to the center of the right rear outer hinge pin? with the arms level. i'd appreciate it.
thanks.
thanks.
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: need a favor...............
i have a feeling that would be the length of just one arm. i need the measurement from the left outer hinge to the right outer hinge. total width of the car in the rear.Moggie XL wrote:Hi scr8p, By my reckoning it is about 84mm.I hope that helps.
-
- Approved Member
- Posts: 553
- Joined: Tue Apr 24, 2007 11:03 pm
- Location: birdsboro,pa
- Been thanked: 2 times
Re: need a favor...............
i think that 84mm would only be for 1 arm thats like 3.3 inches
i know you asked for b4 measurements, but in case you were wondering about a b3 i know thoes measurements.
the total distance between both the rear outer hinge pins center to center with 0 degree rear arm mounts installed is 6 15/16 inches or 176.21mm. this distance of course will increase if using 1.5 degree rear arm mounts.
i know you asked for b4 measurements, but in case you were wondering about a b3 i know thoes measurements.
the total distance between both the rear outer hinge pins center to center with 0 degree rear arm mounts installed is 6 15/16 inches or 176.21mm. this distance of course will increase if using 1.5 degree rear arm mounts.
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: need a favor...............
that's alright. thanks.Moggie XL wrote:Very sorry 184mm is what I should have written.
man, 90+ views, and only one person with a b4 replies?
that car must suck. no else has one.
- templeofspeed
- Approved Member
- Posts: 2087
- Joined: Tue Aug 01, 2006 10:02 pm
- Location: Central Ohio
- Been thanked: 8 times
Re: need a favor...............
I almost bought a T4 just because it still had the Cadillac address on the box, although it was under a Commercenter sticker...scr8p wrote: that car must suck. no else has one.
Whacha doin' with those measurements..?
Re: need a favor...............
I don't have a standard B4 built up It's on the list of things to do.
I do have an X-6 and an Atomic Carbon S2 though
G
I do have an X-6 and an Atomic Carbon S2 though
G
I'm back! I was 'Northy' but my profile got screwed
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: need a favor...............
B3 here or I would have lent you a hand.
Sorry.
Sorry.
He's an idiot. Comes from upbringing. His parents are probably idiots too.
- Synergy
- Approved Member
- Posts: 1787
- Joined: Sat Dec 23, 2006 5:57 am
- Location: North East England
- Has thanked: 127 times
- Been thanked: 70 times
Re: need a favor...............
No B2,T2,B3,T3,B4 or T4 in my garage maybe I should do something about that
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
- scr8p
- Administrator
- Posts: 16550
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 981 times
Re: need a favor...............
i'm just being capt. ball buster with the "the b4 must suck" comment.
it's a super duper secret. shh.................Whacha doin' with those measurements..?
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: need a favor...............
You sound like me. Hold all the details till it is done them BLAMMM!!! Sit back and watch the jaws drop.scr8p wrote:....it's a super duper secret. shh.................
Well, I have not had a chance to make jaws drop yet. but one day I will actually finish a custom and BLAMMM!!!
Oh yeah baby. One day.
He's an idiot. Comes from upbringing. His parents are probably idiots too.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
Who is online
Users browsing this forum: No registered users and 5 guests