Edinger Question

Post by **18ri** » Mon Sep 03, 2012 8:55 pm

I have what I think is an Edinger car. The front A-Arms each have 2 set screws in them; one for the shock rod and another on the rod that connects to the front suspension mount. I didn't see anything about this in the other posts. Has anyone ever seen this? And is it related to Edinger?

Thanks
Joe

Post by **THUNDERSTRIKE1** » Mon Sep 03, 2012 9:22 pm

Should just be the silver rod through the arm holding bottom shock in place with set screw though the top going down to hold the revessed part of the rod. If anything else is there it maybe the swaybar ballmount has broken off its threaded end.Don

Post by **GoMachV** » Mon Sep 03, 2012 10:04 pm

Someone has tapped them, I have seen it before but could never figure out why. The arms do have a nice flat spot there

Post by **18ri** » Wed Sep 05, 2012 10:13 pm

I think you are right....someone just tapped them. Maybe ran out of the e clips or something.

Thanks
Joe

RC10Talk - The Net's Largest Vintage R/C Community