RC10 Advice

[ireg]

Can someone help me to find/post a link for RC10 manual .
I will start building my car, but need some screw information as I don't know what size to be use.

Since this is my first time to assemble an RC10 kit (shame on me) I'm afraid of using a wrong size of screw and be screwed after that .

My first post in this thread as well

[teman]

There's a few here posted depending which buggy you have...
http://lowclasscc.net/downloads/a/associated/

[rctenracer]

http://www.rctube.eu/download/rc/instruction/manuals/Team_Associated_RC10_Manual.pdf

[JamesB77]

Also here from the Assocated website. They have manuals for the 1990 and 1992 CE. They are separated into 4 parts though.

[ireg]

thanks for the link appreciated

[ireg]

Guys need your help again, sorry for the trouble and thanks for your time in advance.

To be honest this is my first build of RC10 and I’m clueless for some information.

I’m building two kits at the same time and whichever finish first that would be my first RC10, unfortunately both have problems.


1st is my Black Tub chassis
a) Shocks (teflon type) – I re-build the shocks twice but still leaking. Shafts are still in good condition, the 0-rings I did not replace as I do not know where to get/buy it (size or brand to be used) any recommendation?

b) Body shell – what is the body shell to be used when you are building a World’s chassis (where to order)

c) Set of Wheels and Tires – I like the green color wheels but do not know what brand it is.


2nd is my Graphite chassis
a) Need screws (less of my worries)

b) Need turn buckles – what is the size of turnbuckles or where can I buy one set of stainless turnbuckles for RC10

c) E-clips can someone advice me on the size of E-clip to be used for the said kit


Hoping someone can find time to answer all my queries.

[klavy69]

a) the 0-rings I did not replace as I do not know where to get/buy it (size or brand to be used) any recommendation? (you can try ebay or towerhobbies. They are associated #5407. or try http://www.ebay.com/sch/i.html?_from=R40&_trksid=p3984.m570.l1313&_nkw=associated+shock+o-rings&_sacat=See-All-Categories)

b) Body shell – what is the body shell to be used when you are building a World’s chassis (where to order) (try Jay here on the board under mrlexan in the business section or pm him. I'm sure he'd be happy to sell you one if he has them available)

c) Set of Wheels and Tires – I like the green color wheels but do not know what brand it is. (what green wheels you talkin bout? The worlds has yellow wheels if that is what you are talking about and they are associated. Ebay is the best place for them or if you have access to the b/s/t area you can post a wanted post in there for them)


2nd is my Graphite chassis
a) Need screws (less of my worries)(by size you can try rcscrewz , mcmaster-carr, fastener-express.)

b) Need turn buckles – what is the size of turnbuckles or where can I buy one set of stainless turnbuckles for RC10 (don't have size right off top of my head...someone will chime in hopefully If not check out ebay again for lundsford titanium and you should find kits there)

c) E-clips can someone advice me on the size of E-clip to be used for the said kit(these take 1/8" e-clips part #6299. Can find them at towerhobbies or ebay http://www.ebay.com/itm/Associated-6299-E-Clips-12-Hinge-Pins-Axles-1-8-SC10-Kit-7027-/390361210208?pt=Radio_Control_Parts_Accessories&hash=item5ae3575d60)


Hoping someone can find time to answer all my queries.

[ireg]

Thanks for all the info .
I've order my 0-ring to Joe (LowClassCC)
hunting for turn buckles now