Hey,
Crystals are not a matched pair are they? If I use a 76 with a 76 it should work?
Frequency crystals.
- jwscab
- Approved Member
- Posts: 6569
- Joined: Wed Jan 28, 2009 9:42 am
- Location: Chalfont, PA
- Has thanked: 16 times
- Been thanked: 496 times
Re: Frequency crystals.
in theory, the crystals should be accurate enough that they will work based on channel number, ie, they don't require anything to be matched. So it probably will work, but it's hard to say for sure.
- soniccj5
- Approved Member
- Posts: 1210
- Joined: Thu Jan 10, 2008 3:23 pm
- Location: Massachusetts
- Been thanked: 2 times
Re: Frequency crystals.
I have used different radios, with different crystals without any issues.
That is why they used to have a radio impound at the track back in the day. If you were in the pits and turned on your radio, and there was a car on the track with the same frequency, it would go crazy.
That is why they used to have a radio impound at the track back in the day. If you were in the pits and turned on your radio, and there was a car on the track with the same frequency, it would go crazy.
- filzemail
- Approved Member
- Posts: 55
- Joined: Thu Jun 30, 2011 12:49 pm
- Location: Hamilton, Ontario, Canada
Re: Frequency crystals.
Hi
Although the crystals may be the same frequency number, they may not be compatible due to the type of "cut" they are. 27 band crystals are all pretty much interchangeable between brands.
On 75 band Futaba, KO, Hitec and the rest are not all compatible. You should stick to the Manufacturer of your particular radio. Check the second number on the crystals(cut, as explained to me), this number must be the same in sets.
The easiest way to be sure is have your equipment with you and try the crystals before buying.
Although the crystals may be the same frequency number, they may not be compatible due to the type of "cut" they are. 27 band crystals are all pretty much interchangeable between brands.
On 75 band Futaba, KO, Hitec and the rest are not all compatible. You should stick to the Manufacturer of your particular radio. Check the second number on the crystals(cut, as explained to me), this number must be the same in sets.
The easiest way to be sure is have your equipment with you and try the crystals before buying.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
Who is online
Users browsing this forum: No registered users and 1 guest