== Useful RC10 Links ==

[martinthegenius]

ty for the bearing link (http://www.avidrc.com/?action=category&id=1), THis is the upgrade for vintage rc10s- link
http://www.avidrc.com/shop/?action=item&id=11&prevaction=category&previd=1&prevstart=0

This is much cheaper than tower- now i can afford to do both of my cars with these

ALso, where might i find original rear tyres for the 84' gold tub

[rc10DS fan]

the new AE site is harde to navagate. they've lost the article section altogether.

[MOmo]

*Duplicate of a diff/ post. My bad.



MOmo

[mrlexan]

Temple needs to pipe in on that one.

[cowsrneat2002]

If you want to repair or have your vintage radios serviced.

http://www.radiosouthrc.com/

[MelvinsArmy]

Somebody asked a while back about part #'s associated with bulk items that might be used on R/C stuff from McMaster. Well, I got bored at work, so here goes...

Nylon wing nuts (natural):
4-40 94924A005
8-32 94924A009
10-32 94924A012

G10 FR4 Garolite (black) 1/8" X12" X12" 85345K12

Nylon Locking nuts (natural) like the ones on the Losi axles and upper shock mounts:
4-40 94909A005
6-32 94909A007
8-32 94909A009
10-32 94909A022

1/8" shaft e clips 98407A116

Silicone O-rings -006 9396K11

.1260" Straight reamer 3087A31

1/4" diameter anodized aluminum rod 12" 6750K13


Most of the small fasteners are 100 ct, but all prices are reasonable. The most expensive thing on the list is the G10 sheet at $12.50. I did not put any prices on here cause the book I was looking at is a few years old. I'm sure everything has gone up some. Their Phone # is 404-346-7000. Hope this helps at least one person out.

And no I dont work for them either.

[tizeye]

This is really cool, there is just so much information on RC10's on here that I'm blown away. I have 2 RC10's that are stock, one has been butchered by a previous owner but with a mint new body and a huge pile of tyres and other odd's and sodd's, but it's best feature is that it has a belt drive conversion on it. I bought a new "A" chassis for it but ended up buying the second RC10 off ebay for a reasonable price of $US76 or around $NZ170-180 delivered a few days later. It is in far better condition than the first one but has a few scratches on the chassis but no body so with what I've got I hope to build a nice restored car. I can't help myself so last week I spotted a Big Boys Toys sprintcar chassis with no suspension/wheels or electrics that I just had to have. I figured that with all of the bits left over from the other 2 cars that I might get a roller together. Well imagine how I felt when I came across the link above to original manufacturers web site..Thanks guys you are legends..
Tizeye

[tizeye]

Ahh Ok after reading more threads on this forum about Big Boys Toys it now appears that my excitment was a little premature..oh well back to plan B and buy a new body off McAllistars..still heaps of help thanks

Tizeye

[WebSteve]

Team Associated documents can be found centrally located here:

http://67.199.85.166/resources/resources.php?page=resources

Steve Husting

[WebSteve]

My vintage RC10 photo books can be found here:

http://stores.lulu.com/vintage_rc10

Steve Husting

[mikedealer]

Gearing Guide Starting points and calculator

http://www.comeseethis.com/gearing/gearing.htm

[PBR Allstar]

Parts needed for dynotech arm/B4 wheel conversion:

http://dynotech-racing.com/partDetail.php?RefNum=2700 Rear X2
http://dynotech-racing.com/partDetail.php?RefNum=2701 Front X2
http://www.avidrc.com/product/?c=0&p=102 Rear hub bearings x4
http://www.avidrc.com/product/?c=9&p=48 Front wheel bearings x4
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEU81 RPM GT Carriers 70272
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSYV7 Associated Rear CVA Kit B44
http://www3.towerhobbies.com/cgi-bin/wt ... LXEAH8&P=Z Associated wheel spacers
http://www3.towerhobbies.com/cgi-bin/wt ... LXKYT2&P=7 Associated wide front axles
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK8&P=SM Associated rear wheels
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK7&P=SM Associated front wheels
http://www3.towerhobbies.com/cgi-bin/wt ... LX2914&P=7 Associated truck bulkhead
http://www3.towerhobbies.com/cgi-bin/wt ... X2964&P=SM Associated shock tower
http://www3.towerhobbies.com/cgi-bin/wt ... X2585&P=SM Associated 1.02 shocks
http://www3.towerhobbies.com/cgi-bin/wt ... LXBVF8&P=7 Associated front springs
http://www3.towerhobbies.com/cgi-bin/wt ... LX2929&P=M Associated truck nose tubes
(these need to be shortened and redrilled for the correct wheelbase)
http://www3.towerhobbies.com/cgi-bin/wt ... LXTHT3&P=7 Dubro turnbuckles (x3 these need to be cut to length but is the cheap way to go, also good to use to determine length if you want to use titanium in the future

Also needed is a truck nose plate, aftermarket ones are plentiful on ebay.

[SnoopMaxx]

Could you plz upgrade the Tower links

[RC104ever]

Parts needed for dynotech arm/B4 wheel conversion:

http://dynotech-racing.com/partDetail.php?RefNum=2700 Rear X2
http://dynotech-racing.com/partDetail.php?RefNum=2701 Front X2
http://www.avidrc.com/product/?c=0&p=102 Rear hub bearings x4
http://www.avidrc.com/product/?c=9&p=48 Front wheel bearings x4
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEU81 RPM GT Carriers 70272
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSYV7 Associated Rear CVA Kit B44
http://www3.towerhobbies.com/cgi-bin/wt ... LXEAH8&P=Z Associated wheel spacers
http://www3.towerhobbies.com/cgi-bin/wt ... LXKYT2&P=7 Associated wide front axles
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK8&P=SM Associated rear wheels
http://www3.towerhobbies.com/cgi-bin/wt ... XEAK7&P=SM Associated front wheels
http://www3.towerhobbies.com/cgi-bin/wt ... LX2914&P=7 Associated truck bulkhead
http://www3.towerhobbies.com/cgi-bin/wt ... X2964&P=SM Associated shock tower
http://www3.towerhobbies.com/cgi-bin/wt ... X2585&P=SM Associated 1.02 shocks
http://www3.towerhobbies.com/cgi-bin/wt ... LXBVF8&P=7 Associated front springs
http://www3.towerhobbies.com/cgi-bin/wt ... LX2929&P=M Associated truck nose tubes
(these need to be shortened and redrilled for the correct wheelbase)
http://www3.towerhobbies.com/cgi-bin/wt ... LXTHT3&P=7 Dubro turnbuckles (x3 these need to be cut to length but is the cheap way to go, also good to use to determine length if you want to use titanium in the future

Also needed is a truck nose plate, aftermarket ones are plentiful on ebay.

Updated these links but they are just searches on Tower Hobbies, maybe someone else can confirm the exact parts referenced above.

Associated Wheel Spacers:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=associated+wheel+spacer&search=Go
Associated wide front axles:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=associated+wide+front+axles&search=Go
Associated Rear Wheels:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+rear+wheels&search=Go
Associated Front Wheels:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+front+wheels&search=Go
Associated Truck Bulkhead (not sure if this is right)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3353&P=7
Associated Shock Tower (not sure which one)
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=++&FVSEARCH=associated+shock+tower&search=Go
Associated 1.02 shocks:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+1.02+shocks&search=Go
Associated Front Springs:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+front+springs&search=Go
Associated Truck nose tubes:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=ASSOCIATED+truck+nose+tubes&search=Go
Dubro Turnbuckles:
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=&FVSEARCH=%3Cb%3Edubro%3C%2Fb%3E+%3Cb%3Eturn%3C%2Fb%3Ebuckles

[Soncho Ponza]

This is awsome stuff...