Screw guide

[esaresky75]

I was thinking about this and if no one has notes written down, then I will next time I disassemble a gold chassis RC10. A guide of the hardware used and where each size goes. Last week, when I took apart two Kyosho Rockys to wash all parts, I didn't have to keep the hardware separate because the Rocky manual shows the size for each step of assembly. I don't know about B2, B3, etc manuals but the RC10 manual tells you to open bag xxx and etc, you all know what I mean. Only a few steps show the size/length of the hardware used on each step. Just a thought.

[THEYTOOKMYTHUMB]

I grabbed a paper and pen for this?? My ol' lady is gonna be so disappointed!

Then again she usually is...

[esaresky75]

I grabbed a paper and pen for this?? My ol' lady is gonna be so disappointed!

Then again she usually is...

sorry, I should have named it machine screw guide...wait, those exist too.

[Lowgear]

Maybe fastener or hardware guide would be a better title? I'd like to know all the ones that were used on a DS. That is unless it tells you in the manual. I haven't looked to see.

[Jedi Master]

It would definately be of help to me. As a newbie who is hoping to embark on a number of RC10 projects/resto's I think that replacement of the screws etc will be the hardest part!

[airbats801]

I have a manual, but a few times I was a bit confused and my car had mis amtched screws on quite a few parts. I'm still wrapping up small things on my first buggy.

[esaresky75]

So I'm not the only one, a guide is needed. Looks like I need to take one for the team and buy a new, sealed in box Gold Pan RC10.

[YZ-10]

Here is a list I compiled last night for the RC10 Worlds, I'll try do a list for the rest if you guys wish? please let me know if anything needs correcting....

RC10 Worlds screw list:

nose tubes - 4x 6288 [BUTTON HEAD Socket screw, 4-40 x 1/4"]

noseplate - 1x 6280 [ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"] 1x 6281 [ALUM. FLAT HEAD Machine screw, 8-32 x 7/8"] 1 x 6931 [ FLAT HEAD Machine screw, 8-32 x 1/4"]

front wishbone carriers - 6x 6280 [ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"]

rear chassis sides to bulkhead - 2x 6925 [SOCKET HEAD Cap screw, 4-40 x 3/4"]

body mount - 1x 6280 [ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"]

shocks to shock tower - 4x 6927 [SOCKET HEAD Cap screw, 4-40 x 3/4"]

front shocks to wishbones - 2x 6930 [SOCKET HEAD Cap screw, 4-40 x 3/4" special]

front tower to bulkhead - 2x 6925 [SOCKET HEAD Cap screw, 4-40 x 3/4"]

rear shock tower to bulkhead - 4x 6932 [SOCKET HEAD Cap screw, 4-40 x 5/16"]

stealth trans - 4x 6935 [ALUM. SOCKET HEAD Cap screw, 4-40 x 1"]

battery strap - 2x 6924 [SOCKET HEAD Cap screw, 4-40 x 3/8"]

transmission brace - 4x 6932 [SOCKET HEAD Cap screw, 4-40 x 5/16"]

chassis to motor plate - 2x 6285 [SOCKET HEAD Cap screw, 4-40 x 1/4"]

rear shocks to wishbones - 2x 6927 [SOCKET HEAD Cap screw, 4-40 x 3/4"]

chassis to trans - 4x 6292 [FLAT HEAD Socket screw, 4-40 x 3/8"]

chassis to servo posts - 2x 6292 [FLAT HEAD Socket screw, 4-40 x 3/8"]

chassis to aerial mount - 1x 6922 [FLAT HEAD SOCKET screw, 4-40 x 1/2"]

chassis to battery cup - 2x 6922 [ FLAT HEAD SOCKET screw, 4-40 x 1/2"]

chassis to rear bulkhead - 2x 6280 [ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"]

chassis to rear wishbones carriers - 4x 6280 [ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"]

gear dust cover - 2 x 6285 [SOCKET HEAD Cap screw, 4-40 x 1/4"]

shock spring clamps - 4x 6860 [ALUMINUM SCREW, 4-40 x 3/8"]

3 piece front wheels - 6x 6860 [ ALUMINUM SCREW, 4-40 x 3/8"]



14x ASC6280 - ALUMINUM FLAT HEAD Machine screw, 8-32 x 1/2"
1x ASC6281 - ALUM. FLAT HEAD Machine screw, 8-32 x 7/8"
4x ASC6285 - SOCKET HEAD Cap screw, 4-40 x 1/4"
4x ASC6288 - BUTTON HEAD Socket screw, 4-40 x 1/4"
6x ASC6292 - FLAT HEAD Socket screw, 4-40 x 3/8"
10x ASC6860 - ALUMINUM SCREW, 4-40 x 3/8"
3x ASC6922 - FLAT HEAD SOCKET screw, 4-40 x 1/2"
2x ASC6924 - SOCKET HEAD Cap screw, 4-40 x 3/8"
4x ASC6925 - SOCKET HEAD Cap screw, 4-40 x 3/4"
6x ASC6927 - SOCKET HEAD Cap screw, 4-40 x 3/4"
2x ASC6930 - SOCKET HEAD Cap screw, 4-40 x 3/4" special
1x ASC6931 - FLAT HEAD Machine screw, 8-32 x 1/4"
8x ASC6932 - SOCKET HEAD Cap screw, 4-40 x 5/16"
4x ASC6935 - ALUM. SOCKET HEAD Cap screw, 4-40 x 1"

[Jedi Master]

Awesome work! Cheers dude!!