My RC10 has the shorty arms but no roll bar in the front, are the roll bars hard to come by and whats the best way to put the ball end in the arm for the mini turnbucke that mounts to the sway bar from the a arm
The kits are on ebay a fair amount, and they come with a 2/56 threaded ballstud for the arm, and the 4/40 threaded rod and ballcups and all hardware for the kit ( which can also be used in the rear )
I'm building up a ce sleeper and came up with a shorty pack mount, adjustable to either up aganinst the steering servo, or back a bit. Either way I plan on taping down the speedo in line behind it. Began with an old t bar...
Then using a battery...
Last post
8)
looks like the battery brace i have to make for my rory cull replica. just a little bit longer in the back though. :wink:
I borrowed this pic from Ruffy's gallery thread to describe what I'm asking.
What is need to achieve the roll bar and netting look?
What is the best way to trim the body this way?
I have seen some people use what appears to be window screening as...
Last post
very cool and hate to hijack, but what's with the fastner on the shock screw instead of a nut? looks like a steering rod do hicky thingy?
It's a box art replica, and fully accurate to the original RC10s (look at the box ;)).
I'm racing my B3 on carpet soon and want to fit a rear rollbar. Anyone have photos/instructions of where it clamps to the chassis?
Thanks.
Last post
95DC1AC9-F063-43A6-A313-392DE4780AA5.jpeg 8D3B2C6D-3BD9-4D1B-ABDD-9580A2E57D6C.jpeg
Sorry it took some time, knew I had it somewhere. Just took a while to find somewhere :lol:
Hi guys a simple question. Which colour roll bar should I use on my Hot Trick Dog Fighter? Both are Hot Trick, one is gold the other black.
Cheers
Ed
Last post
Well thanks for all your input guys. I am going black as I don't like the mismatched gold anodizing. I will also probably change the shocks for some Kyosho reds to keep colour coordination.
The gold roll bar has now been put on my freshly built Hot...
Theres gotta be an easier way :lol: (but it did work though) :lol: :lol: :lol:
how do you solder the metal ball coupler to the wire?
photo.JPG
Last post
Hey Jon, browsing the posts I noticed you where from Staten Island, I used to live there moved about 6 years ago, i used to go to a hobby store on port richmond ave is that still open ? Have they built any new tracks ? ... anyway good luck with your...
Just looking at my Procat with it's spoofy anti-roll bar on the front suspension. It's mounted on the top chassis plate underneath the drive-belt, but the belt actually touches it. The instruction manual shows that arrangement too. Seems to me it's...
Last post
Belt is extremely close but I don't know if it actually touches. I've never had an issue with my CATs or Procats but I believe some run bar under top deck which might be a solution.
has some one got a link for anti roll bars rc10 or advice, photo, suggestions. Having been running on some flat grass tracks and indoors on carpet the buggy dose have a lot of roll would it benefit from a anti roll bar ?
regards veeza -Rc10 team and...
Greetings,
I've looked at the instruction manual online but I can't seem to find a template for bending the front anti roll bar. Can somebody point me in the right direction please? The only pic I can find is this one but it doesn't look to helpful...
Last post
Pretty sure anti-roll bar never changed, until Bosscat came along and deleted it.
Ok, thanks
Bing [Bot],