Goldie into runner build
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 104 times
- Been thanked: 200 times
Re: Goldie into runner build
Eau Rouge's build has NO machining for the bearings, he is using B44 CVD's, I have the machined rear hubs and am using B4 Bones/Axles (I havent gotten my CVDs yet). For a stock arm & B4 rear carriers (only the hinge pin hole opened up), use the B44 stuff...no other modifications.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- Darkrider
- Approved Member
- Posts: 82
- Joined: Sun Oct 24, 2010 6:20 am
- Location: Lloydminster Sask Canada eh?
Re: Goldie into runner build
Thanks for the info! Will def keep it in mind. I have pretty much decided to keep my current gold pan as is. I'm planning on picking up another to do an old is new type of rc10.Heck I might just go nuts and get myself a sheet of cf and cut a graphite style chassis for that sort of build lol
- vintage AE
- Approved Member
- Posts: 3012
- Joined: Fri Nov 14, 2008 1:47 pm
- Location: Sunken Lake, Nova Scotia
- Has thanked: 29 times
- Been thanked: 35 times
- Darkrider
- Approved Member
- Posts: 82
- Joined: Sun Oct 24, 2010 6:20 am
- Location: Lloydminster Sask Canada eh?
Re: Goldie into runner build
Didnt take much really considering i already have a few other RC10s. Namely 2 T3s, a T4 and B4vintage AE wrote:darkrider is addicted already
- vintage AE
- Approved Member
- Posts: 3012
- Joined: Fri Nov 14, 2008 1:47 pm
- Location: Sunken Lake, Nova Scotia
- Has thanked: 29 times
- Been thanked: 35 times
- Darkrider
- Approved Member
- Posts: 82
- Joined: Sun Oct 24, 2010 6:20 am
- Location: Lloydminster Sask Canada eh?
Re: Goldie into runner build
That i can def agree with you on!vintage AE wrote:ah, I see. BUT this vintage stuff gets people
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 104 times
- Been thanked: 200 times
Re: Goldie into runner build
So, how do you keep your freshly refinished chassis from getting all banged up? (YES, this is being built to race, not sit on a shelf...)
Here's a hint...
Here's a hint...
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 104 times
- Been thanked: 200 times
Re: Goldie into runner build
okay...waited long enough....
This will be going to my painter to attempt to copy onto a Protech...
This will be going to my painter to attempt to copy onto a Protech...
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 104 times
- Been thanked: 200 times
Re: Goldie into runner build
This one may be the first. If you want one, send them an e mail. I replied to let them know I got it today, I asked if they are going to add it to the site.
I know it took a bit for this one (about 2 weeks), they needed to set up the die for the chassis.
Next to the shock towers, this was the most expensive part I have bought for the car so far...($25)
I know it took a bit for this one (about 2 weeks), they needed to set up the die for the chassis.
Next to the shock towers, this was the most expensive part I have bought for the car so far...($25)
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 104 times
- Been thanked: 200 times
Re: Goldie into runner build
as much as it pains me...over the screws. I know, if I have to pull something off its gonna get ugly.
after the painter shoots the body, he and i will attempt to "install" it...
after the painter shoots the body, he and i will attempt to "install" it...
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- vintage AE
- Approved Member
- Posts: 3012
- Joined: Fri Nov 14, 2008 1:47 pm
- Location: Sunken Lake, Nova Scotia
- Has thanked: 29 times
- Been thanked: 35 times
Re: Goldie into runner build
I was wondering the same thing. It's getting close to putting chassis protector on my graphite runner.mikea96 wrote:That is going to look sick when it is done. Are you going to put it over the screws or run them through the protector?
Your's is going to look awesome
- Johnboy72
- Approved Member
- Posts: 713
- Joined: Wed Sep 15, 2010 11:08 pm
- Location: Waynesville, MO
- Been thanked: 8 times
Re: Goldie into runner build
Very impressive. Your model RC10 is the very first RC10 I owned, unsure of what version of the gold tub it is. But I can't get over these builds. Might have to start looking for some old gold tub ebay cars.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 86 Replies
- 8879 Views
-
Last post by Charlie don't surf
-
- 6 Replies
- 1260 Views
-
Last post by GoMachV
-
- 37 Replies
- 2699 Views
-
Last post by THEYTOOKMYTHUMB
-
- 16 Replies
- 1564 Views
-
Last post by farmer
-
- 2 Replies
- 1340 Views
-
Last post by lmwong
-
- 8 Replies
- 1330 Views
-
Last post by Coelacanth
-
- 5 Replies
- 834 Views
-
Last post by DerbyDan
-
- 10 Replies
- 2238 Views
-
Last post by scoobyrs25
Who is online
Users browsing this forum: Google [Bot] and 41 guests