old timer
old timer
this is my latest i just threw together with some leftover parts and a oval chassis i got from jason [scr8p]. now i gotta wait 4 weeks till race day . through the summer we are only running the last saturday of every month
- Attachments
-
- scots cars 005.jpg (114.49 KiB) Viewed 2329 times
- scots cars 005.jpg (114.49 KiB) Viewed 2329 times
-
- scots cars 003.jpg (114.13 KiB) Viewed 2329 times
- scots cars 003.jpg (114.13 KiB) Viewed 2329 times
-
- scots cars 002.jpg (114.64 KiB) Viewed 2329 times
- scots cars 002.jpg (114.64 KiB) Viewed 2329 times
- PBR Allstar
- Approved Member
- Posts: 805
- Joined: Mon Apr 30, 2007 10:30 pm
- Location: Sonoma, Ca
- Has thanked: 1 time
- Been thanked: 3 times
its a mcallister body,team toto chassis,and custom works/coopers wheels and tires,[green compound]. i'll get some body off pics and post them tomarrow. jason,[scr8p] i don't know if it will fit the raborn chassis. this body narrows in the front alot. i think it was made to fit standard chassis with no offset........................
thanks for looking guys...........................
scot.
thanks for looking guys...........................
scot.
heres some body off pics..............
- Attachments
-
- scots cars 017.jpg (84.21 KiB) Viewed 2184 times
- scots cars 017.jpg (84.21 KiB) Viewed 2184 times
-
- scots cars 014.jpg (86.58 KiB) Viewed 2187 times
- scots cars 014.jpg (86.58 KiB) Viewed 2187 times
-
- scots cars 009.jpg (97.52 KiB) Viewed 2189 times
- scots cars 009.jpg (97.52 KiB) Viewed 2189 times
-
- scots cars 007.jpg (65.79 KiB) Viewed 2188 times
- scots cars 007.jpg (65.79 KiB) Viewed 2188 times
-
- Approved Member
- Posts: 553
- Joined: Tue Apr 24, 2007 11:03 pm
- Location: birdsboro,pa
- Been thanked: 2 times
thats an interesting front end standard rc-10 bulkheads mounted closer together, are they mounted on a 10t nose plate or is it custom drilled.
the hinge pin mounting points look spaced out like a 10t/gt bulkhead that should give an awesome balance front to rear for oval. i have an original custom works rc-10 enforcer conversion i was going to do the same thing on to get it to turn in better for oval. yes i said rc-10 flat nose conversion not enforcer-10 its a rare custom works complete buggy conversion using rc-10 front and rear suspension.
the hinge pin mounting points look spaced out like a 10t/gt bulkhead that should give an awesome balance front to rear for oval. i have an original custom works rc-10 enforcer conversion i was going to do the same thing on to get it to turn in better for oval. yes i said rc-10 flat nose conversion not enforcer-10 its a rare custom works complete buggy conversion using rc-10 front and rear suspension.
-
- Approved Member
- Posts: 553
- Joined: Tue Apr 24, 2007 11:03 pm
- Location: birdsboro,pa
- Been thanked: 2 times
sorry doug i dont have any pictures yet but there might be some on dirtoval if you can access the archives because i bought it from Tehachapi Flash over there last july it was in the classifieds. i have tried to get the photos off there but can't find them anymore, if you can get them go ahead and post them here i'm sure the guys will love it.
- Eau Rouge
- Approved Member
- Posts: 2225
- Joined: Sat Jul 29, 2006 11:59 pm
- Location: Aurora, Illinois
- Has thanked: 2 times
- Been thanked: 2 times
Nah, the previous owners liked to delete old Classified threads, so they don't go back real far anymore, unfortunately.
I've never seen or heard anything about a Custom Works conversion like that. I don't recall ever seeing Custom Works doing any conversions for any cars. I'm anxious to see what it looks like.
I've never seen or heard anything about a Custom Works conversion like that. I don't recall ever seeing Custom Works doing any conversions for any cars. I'm anxious to see what it looks like.
-
- Approved Member
- Posts: 553
- Joined: Tue Apr 24, 2007 11:03 pm
- Location: birdsboro,pa
- Been thanked: 2 times
i actually have 2 of them 1 i got 3 years ago on ebay its just the cage,chassis plate, body and a few other odds and ends but the newest one is complete and ready to run. when i first saw it i figured it was a custom chassis but when it arrived and i saw the finished edges,clean countersinks and straight lines i was like wow this must be original. the first chassis is thinner black fiberglass withh a white core and the 2nd one is classic older style custom works graphite including the shock towers. they both have a flat nose with cheetah style 10 degree caster wedges under the front bulkheads. the way the front shock tower is designed the front part of the cage gets cut off and bolted to it similar to a big boys sprinter because the shocks and tower will not clear the cage. this allows it to retain all stock rc-10 geometry.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
Who is online
Users browsing this forum: Google Adsense [Bot], limestang and 31 guests