Chain drive tranny for RC10

Moderators: scr8p, klavy69

5 posts • Page 1 of 1

old_rc_lover: Approved Member; Posts: 93; Joined: Sun Jan 10, 2010 11:10 am; Location: Missouri, USA

Chain drive tranny for RC10

Quote

Post by old_rc_lover » Sun Jan 24, 2010 6:40 pm

Does any one have a manual showing the assembly of the chain drive tranny for the RC10?
I picked one up off of E-bay, but it was apart. I think it is missing the top shaft. Could I use a stock top shaft?

burnsmonkey: Approved Member; Posts: 139; Joined: Fri Jan 01, 2010 9:22 am; Location: Top Left of GA

Re: Chain drive tranny for RC10

Quote

Post by burnsmonkey » Sun Jan 24, 2010 6:54 pm

Bad link!

old_rc_lover: Approved Member; Posts: 93; Joined: Sun Jan 10, 2010 11:10 am; Location: Missouri, USA

Re: Chain drive tranny for RC10

Quote

Post by old_rc_lover » Sun Jan 24, 2010 9:40 pm

Thanks. that should work.

old_rc_lover: Approved Member; Posts: 93; Joined: Sun Jan 10, 2010 11:10 am; Location: Missouri, USA

Re: Chain drive tranny for RC10

Quote

Post by old_rc_lover » Tue Jan 26, 2010 11:26 pm

Be aware, I believe that the link above did infect my computer with a hacker program.. It took Nortan 2 and 1/2 hours to remove it from my hard drive.

burnsmonkey: Approved Member; Posts: 139; Joined: Fri Jan 01, 2010 9:22 am; Location: Top Left of GA

Re: Chain drive tranny for RC10

Quote

Post by burnsmonkey » Wed Jan 27, 2010 4:27 pm

Are you sure? My computer is fine. I will edit the link. Sorry if it did.

Post Reply

5 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

MIP SP-2 Chain Drive RC10

Last post by hckyfntck « Thu Jul 30, 2020 2:58 pm
Posted in RC10 Buggy Forum
Replies: 14
by rcpitwork » Mon Aug 04, 2014 7:58 am » in RC10 Buggy Forum

First post

hi ,
this time to share with all .......are my MIP SP-2 Chain Drive RC10.
this are one of my favorite.......
now just hope have the chance to own the MIP cable version,that can complete my MIP 4x4 collection.

hope all enjoy the pics :D :D :D...

Last post

Well....... I am hopeful (if not naive) that someone here has already crossed this hurdle and is will to share, or be compensated to have one scanned (original) and fab one up..

IF only technical drawing is needed and someone gave me the input...

14 Replies

2812 Views

Last post by hckyfntck
Thu Jul 30, 2020 2:58 pm
My MIP RC10 4wd Chain Drive

Last post by myfordcnc « Sun Mar 03, 2013 11:27 pm
Posted in RC10 Buggy Forum
Replies: 26
by kenooze » Sat Nov 24, 2007 2:20 pm » in RC10 Buggy Forum
1

2
First post

It's me again !

I take the time to finish also this project, a all new MIP RC10 4wd Chain Drive :lol:

Now I'm going to work on my RC10 Team Car full RPM world end's, my A&L Trailing arm's with Graphite chassis, my bullet front RC10 end's and Losi...

Last post

this is probably the most valuable RC10 at the moment. nice work, you must have a lot of boxes filled with things :lol:

Realy?

It might be gauche to ask but are we talking hundreds or thosands?

See what I did there? (sliped in some french) :)...
26 Replies

5491 Views

Last post by myfordcnc
Sun Mar 03, 2013 11:27 pm
RC-10 Chain Drive Transmission ??

Last post by vintage racer « Mon Aug 25, 2008 5:30 pm
Posted in RC10 Buggy Forum
Replies: 11
by fordtransman » Sun Aug 24, 2008 12:39 am » in RC10 Buggy Forum

First post

I THOUGHT THIS WAS AN INTERESTING ITEM, I HAVE NEVER HEARD OF THIS AFTERMARKET MOD...

I HAVE BOUGHT FROM THE SELLER IN THE PAST, AS HAVE A FEW OTHERS ON OUR SITE, A GOOD SELLER.

CHECK IT OUT!!

Last post

Surprisingly mine is very quite but it is running a hyperdrive belt system for the primary drive.I still have to swap the motor plate to the other side as pointed out by Highway racer in a previous thread as the belt drive system drives the spur the...

11 Replies

2018 Views

Last post by vintage racer
Mon Aug 25, 2008 5:30 pm
Mid motor chain drive Optima is it possible?

Last post by keithrc « Sat May 11, 2013 4:32 am
Posted in Kyosho Forum
Replies: 18
by keithrc » Thu May 02, 2013 3:29 am » in Kyosho Forum
1

2
First post

This might be a weird idea but I remember thinking of this when I was younger and still had my original Optima. Would it be possible or, even feasable for that matter, to convert a MK1 chain drive Optima to a mid mounted motor?

I'm thinking keep...

Last post

Interesting, thanks for the link. I don't like the monoshock at the front though, can't see it being an improvement over the stock arrangement.

Keith :wink:
18 Replies

1981 Views

Last post by keithrc
Sat May 11, 2013 4:32 am
AYK RF4WD Quattro chain drive

Last post by purpletimbo « Thu Sep 17, 2009 11:49 am
Posted in AYK Forum
Replies: 3
by tizeye » Wed Sep 16, 2009 8:15 pm » in AYK Forum

First post

Here's a couple of rare cars..

Last post

Pity you don't live in UK, I could do with someone like you for my shed, me and Ju sound alike :mrgreen:

3 Replies

793 Views

Last post by purpletimbo
Thu Sep 17, 2009 11:49 am
A question about chain drive 4wd cars?

Last post by aip47-2008 « Thu Jan 02, 2014 7:08 pm
Posted in R/C Off-Topic / Chit-Chat
Replies: 17
by urban hype » Tue Dec 10, 2013 7:58 pm » in R/C Off-Topic / Chit-Chat
1

2
First post

Does anyone know if all of these old chain drive 1/10 4wd cars use the same chain. From what I have seen is that all of these chains that were used on Kyosho, AYK and others all look the same but were different lengths. Can anyone confirm if this is...

Last post

The optima originally had a lightweight chain and when the turbo optima was released it had a heavier duty chain which was available as a hop up for all optima series platforms that used chain for its drive, the pitch of the heavy duty chain was...
17 Replies

2725 Views

Last post by aip47-2008
Thu Jan 02, 2014 7:08 pm
MIP SP-2 Chain Drive 4 x 4 Conversion Kit Instructions

Last post by ChocoTaco73 « Tue Feb 08, 2022 2:52 pm
Posted in Vintage Catalogs / Instruction Manual Scans
Replies: 5
by a01butal » Sun May 13, 2012 4:38 pm » in Vintage Catalogs / Instruction Manual Scans

First post

Couldn't find any SP-2 instructions in the scans section so thought I would put some up, additionally I will do the SP-45 belt drive upgrade instruction in a 2nd post.

Last post

Out of curiosity do you happen to have the MIP cable drive 4x4 instructions? I've never seen a kit in person but remember pics of it way back when.

5 Replies

2272 Views

Last post by ChocoTaco73
Tue Feb 08, 2022 2:52 pm
Team Pit Stop Chain Drive Transmiision

Last post by aip47-2008 « Sun Nov 19, 2017 4:53 pm
Posted in Vintage Catalogs / Instruction Manual Scans

by aip47-2008 » Sun Nov 19, 2017 4:53 pm » in Vintage Catalogs / Instruction Manual Scans

Team Pit Stop Manual 2.jpeg Team Pit Stop Manual 2.jpeg Team Pit Stop Manual 3.jpeg Team Pit Stop Manual 4.jpeg

0 Replies

1776 Views

Last post by aip47-2008
Sun Nov 19, 2017 4:53 pm

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 12 guests