rc10 crazy super long arm runner project---dubbed"THE FREEK"

[lowrydesign]

this is what happens when creativity meets a bunch misc parts laying around........

it all started with a worlds chassis that had been narrowed "not by me"

-in the rear

old rpm truck arms "pre 10t"
b4 cvds
rpm worlds inner arm mounts
rpm big bearing carriers
rpm 2.6 truck trans
rpm 10t bulkhead
composite craft 10T rear tower
1.32 shocks

-in the front

white mip steering....ooohhhlalala
10t truck nose plate
10t front bulkhead-- modified to fit arms
10t blue nosetubes shortened
rpm rc10b3 front arms
rpm worlds front shock tower
1.32 shocks "yes rears up front!!"
rc10b4 FT spidles and carirers w/ trailing axles
_____________________________________________
so how does it drive??

AWSOME!!!! this thing soaks up everything... and since its super wide its uber stable...its a blast to drive..

- with b3 wheels its F/R track width is a bit wider than a b4.

_ Ive got about 15 hours logged on it now, time to put it on the shelf before i wear out all the parts!!!

[tecnica2001]

Horrendous, you should throw that thing away!!!!

PS: Before you throw it way, give me your full address.....

That thing looks awesome, kinda freakish looking, but awesome....

[lowrydesign]

That thing looks awesome, kinda freakish looking, but awesome....

freekish is a good name for it !!!

the arms on it are 3/16 longer than rpm worlds........

[Daddeo]

Very cool project! I was seriously pondering the idea of putting B3 arms on my A&L build and you beat me to it .....

Good job on it!

[matteo]

Me likey a lot!! How much wider is the suspension over the B4? Also, are the rear arms not at wide as the 10t arms?

[lowrydesign]

Me likey a lot!! How much wider is the suspension over the B4? Also, are the rear arms not at wide as the 10t arms?

the rear arms are shorter than standard 10t
i dont have a b4 to measure off of, i had met a guy at the track, and we compared then.

[gregm]

A B4 should be max 250mm wide per IFMAR/ROAR rules.

Great build. I've been rethinking what to do with the 10T on my workbench. This has been helpful. Thanks!

edit 150?

[lowrydesign]

A B4 should be max 150mm wide per IFMAR/ROAR rules.

well i guess this car wont pass that measurement!!

[Mr. ED]

it should be 250 not 150 mm , but, yes, you're out.

Still a cool project and I'd like to see one of those many action shots you gathered during all those hours!

[lowrydesign]

Still a cool project and I'd like to see one of those many action shots you gathered during all those hours!

yea that would be cool, no one to take pics..

[lowrydesign]

it should be 250 not 150 mm , but, yes, you're out.

with b4 wheels it will fit in the box.........

[delsami]

to nice of a chassis to beat up. even with the worlds rear end it is still a real worlds car chassis. i understand though, gotta run something can't have everything on the shelf!!

[lowrydesign]

to nice of a chassis to beat up. even with the worlds rear end it is still a real worlds car chassis. i understand though, gotta run something can't have everything on the shelf!!

i use jconcepts 3m film on the bottom.. it keeps it nice and safe