RC10DS - Lamborghini Gallardo

[LoboNYC]

The story goes like this, i acquired two Associated DS cars and a 3Racing FGX F1 car in trade for a new in the box Tamiya F201. My buddy warned me that the DS cars needed work. The chassis' had been sharpied over to hide the scrapes and scratches. the tires were torn and both cars needed a few parts here and there. I still wanted them.

i got a custom powder coated chassis that was originally orange anodized. i guess the guy placed decals , powder coated then removed the decals. not sure what the technique was but it looked cool as he placed a Lamborghini logo and the bull on them.

needless to say i was stuck getting a Lambo body. The car has a MIP ball bearing steering setup, the tranny was freshened up with new diff balls, diff rings, and diff gear. The wheels came from an unbuilt NTC3 kit i had in the closet. The Lambo body is a PVC body that came from overseas.

Its a little odd seeing a DS sport a Lambo body but it seems to work. This old car was given a new lease on life with style.

let me know what you guys think.

[RC10resto]

Looks great
But your tail light stickers should be mounted higher

[limestang]

I believe the chassis was customized by Don Martin. The finished car is stunning!!! Great Job!

-limestang

[romulus22]

Looks killer Alex

[RC104ever]

Where did you get those wheels? Would love a set so I can do something similar with my Lambo shell on my HPI Pro2

[matt1ptkn]

That is a very cool car. The Lamborghini body fits very well. I'd say you did well in the trade. Especially since your Tamiya was only a "new in fox".

[LoboNYC]

Looks great
But your tail light stickers should be mounted higher

I appreciate your pointing that out as i was getting confused with the curvature of the tail lights. I have corrected them. They still dont align fully correct with the lines of the body as say HPI decals, but then again its not an HPI body...in fact it has no brand, lol.

I believe the chassis was customized by Don Martin. The finished car is stunning!!! Great Job!

-limestang

I believe you are correct as the initials on the ebay email are DM. I sent Don a link to forum so hed know his chassis was taken care of Thanks for the compliment

Looks killer Alex

Thanks a million Todd, my buddy! Means a lot man! Now i can finally try and finish the saleen mustang DS and get started on the #77 green challenger NDS. ITs a lot of fun working on the same type of car over and over again. as always i will be sending you the updated build pics

Where did you get those wheels? Would love a set so I can do something similar with my Lambo shell on my HPI Pro2

AHHH ive been asked that question a lot on Instagram These wheels came from a NTC3 factory team car i purchased a while back. i got it cheap as the kit was sealed in original bags with manuals but missing the box. This kit is still unbuilt but heck i needed them wheels. The choice of white body paint was due to the wheels. The project quickly gained steam again and was finally finished. Ive tried looking for them so i can replace them on the NTC3 but have yet to come across a set.

[RC10resto]

Much better, very nice

[Coelacanth]

Is it possible the taillight stickers are on the wrong sides? Looking at the curvature, I wonder if you have the left one on the right side and vice-versa. I don't know if those are identical left/right, but if not, it could be just different enough to not match the lines. I know many people got their "hockey stick" stickers messed up on the HPI '70 Challenger T/A body because they put them on the wrong sides.

[LoboNYC]

That is a very cool car. The Lamborghini body fits very well. I'd say you did well in the trade. Especially since your Tamiya was only a "new in fox".

Great scott batman, i screwed up my typing and Alfred didnt spell check Thanks i made correction...no more Tamiya foxes in box. By the way...the tamiya was not a loss for me...i had three already...it was blessing in disguise as two used DS's are better than one new tamiya (thats just my opinion though )

Much better, very nice

Constructive criticism is always appreciated when striving for perfection. I may purchase same body again just to correct some of the mistakes i made.

Is it possible the taillight stickers are on the wrong sides? Looking at the curvature, I wonder if you have the left one on the right side and vice-versa. I don't know if those are identical left/right, but if not, it could be just different enough to not match the lines. I know many people got their "hockey stick" stickers messed up on the HPI '70 Challenger T/A body because they put them on the wrong sides.

Im going to go home and look over carefully. to see if you are correct. i may mock up a set of taillight decals to see if how it would look if i revered them. again the body is a no-name brand and the body line decal tolerances may be off. as i told RC10resto i may redo a second body.

[slow_jun]

nice, any links on the Lambo Body? my kid would love this. any mods made to fit those tc3 to DS axles?would like to see it.

thanks.

[slotcarrod]

Looks bad ass!

[TOLITS]

nice, any links on the Lambo Body? my kid would love this. any mods made to fit those tc3 to DS axles?would like to see it.

thanks.

Maybe this one.
The decals looks the same though.

http://www.ebay.com/itm/1-10-Lamborghini-190mm-RC-Car-Transparent-Body-Shell-PVC-/161389709970?pt=Radio_Control_Parts_Accessories&hash=item2593938a92

[slow_jun]

ahh 190 mm... tnxs...

[Lonestar]

coolest "deviation" of a DS I've ever seen. The stock tc3 wheels from bitd look right at home with an almost-lambo design