RC10Talk - The Net's Largest Vintage R/C Community

I'm showing 3.5mm for the chassis plate thickness.

You might be a little long on the front of the plate / or back a little on the arm mount/tower assembly? Notice the plate front lip in relation to the arm mount(s) And nice dogbones!

Supernaut wrote: ↑Sat Feb 18, 2023 1:41 pm Found a Drag Link so now I just need holes from bend.
And from steering post hole to servo hole.

I have approx 42.5mm from bend to steering post hole center.

I have approx. another 8mm from steering post hole center to servo hole center

sorry for the delay, the crappy sketch and the imperial dimensions. :D I don't have a metric caliper or scale immediately at my disposal. these are not all of the dimensions, but should be plenty to confirm everything you need. If you have any particular questions, just ask. I'll say that the kick i...

I am thrilled to say that I found this NIB Traxxas XL-3 controller. This was the final piece I have been looking for, and should fit this car just right. I thought these pictures of the box and parts looked pretty cool. In the below box art photo, the receiver appears to be a Novak NER-2X wrapped in...

I found some airplane wrap at my LHS in a color that is a great match to the wrapped receiver in the box art.