RC10Talk - The Net's Largest Vintage R/C Community

Managed to get the battery to fit into an original styled Battery Box by moving it forward a couple mm and cutting a slot for the wires. It now fits in a stock Mini Jrx2 with stock electronics and battery. I have also included the original live hinge model if you have a decent semi flexible filament...

Well, just need to wait for my orange pla to arrive so I can try printing out my walking clock....

They should work fine and be fairly light on support material to print thanks to those deep cones. I am going to hold off uploading them for now as I want first crack at printing them lol.

If you build up from parts, the bellcrank posts require 2.5mm e clips which are completely unlisted and not supplied in any mini jrx2 parts bag. I used Axial as they were cheapest.

Thanks Jeff, I will have to go looking for that.

Just found it, it looks good, I will probably pick up some og parts so I can calibrate size... time to buy bulk Reprapper white pla+ lol... I think it would look right with super knobby rc10 classic rear tires lol

JK Racing wrote: ↑Sun Jul 10, 2022 12:05 am...& reduce the number of projects I have...

Pfft likely story!!

As far as the Hawk goes- I found a complete first gen cad model on grabcad a while back. I haven’t looked it over real close but it looked pretty solid. So tempted.. so very very tempted.. was my first performance rc... Edit and as I was typing this it FINALLY imported into tinkercad... -insert YES...

Would that be a Hawk Chick? lol

I don't think I can do that, technically all these parts would be owned by Losi and I don't want to risk lawsuits. You could take the stl file to a third party service and get them printed if you want or I could print you copies. I think cults even directly links you to services that will print. I a...

Cults is linked to a service that will print your 3d files for you. It connects to many printshops around the world with options in material and surface finish among others. That and if you really only wanted to use Shapeways there is nothing preventing you from taking the stl over there manually. H...

This is sort of a branch off from the Mini Jrx2 thread. Jeff pointed me to some Traxxas Hawk cad files and being as the hawk was my first performance RC I have been considering making a mini version of it as I have been designing all these parts for the Mini Jrx2. I printed off a test chassis but wh...

It's looking pretty good so far, I must say those short front arms look even funnier on this then they did on the RC10.

RELEASE THE TAMIASSOSI!

Do you love the JrxT or Jrx Pro? Do you want a really floppy replica of one in 1/16 scale? Now is your chance! Did this for someone who wanted a model of the chassis to make a graphite chassis from, decided to toss it on cults as a lark... Floppy Chassis: https://cults3d.com/en/3d-model/game/mini-jr...

Those look promising. Right type of offset and even a period correct look. I'll order a set up and report back after the results. I think those in combination with these we may have a cheap modern option. https://www.ebay.com/itm/293983011964?hash=item4472c0c47c:g:XIcAAOSwThdg7jVp&amdata=enc%3A...

Added a jig to help drill out the inner ball joint locations on the rear bulkhead. The one I uploaded has all 4 on each side where the test piece only had 3. The Triangle points up and.. well you are likely going to need some epoxy or something on the backside to add some meat if you need to use the...

This is what I have come up with so far, I am doing some test prints to make sure everything is where it should be. It is not 100% accurate but it allows the outdrives to push through the case without universal joint disassembly. This should allow it to work with whatever they come up with in the fu...