RC10Talk - The Net's Largest Vintage R/C Community

Great cars all,

Hard to choose between the Jrx2 and Avante for me, so I rolled back my mind to the late 80s and the choice was easy. "Jrx2"

Cheers
Rob

The Cat pictured, should be a 98. Shock bodies would be the same, the purple aluminum cartridges on Your shock are a hop-up version and not 98 specific.

Edit:
If You have the blade outdrives it´s most likely borne as a 98. What kind of outdrives does the manual show/refer to?

id say its a 98, the se had plastic shocks. its certainly a 98 in its current guise anyway. nice find, i saw this on the tamiya forum, was tempted by it myself!
did you find the parts you were after for your other one?

I was able to find the front hub and knuckle in the spares. There is a motor mount but I guess it goes with the 98 so I still need one of those. Still need a belt tensioner as I don't think the 98 used one. I also need the driveshaft. There are 3 spare axles, 2 with the blades but the diffs are dif...

Every one deserves points this month

Hi all, the intention of this post is to serve as a reference point detailing how to duplicate some of the rear end setups I've used and get a lot of questions on. I'll preface this by stating that there are a lot of different CVA/CVD and wheel/hub/arm combinations. This post is specifically focusin...

Check PM

Chuck

Burniefloyd wrote: ↑Mon Jul 13, 2020 9:11 pm

radioactivity wrote: ↑Mon Jul 13, 2020 6:52 pm Check PM

Chuck

Thanks Chuck. I replied but looks like it might be stuck in my outbox.

it'll stay in your outbox til chuck reads it. Its a slow time right now so hope he's been active since you wrote this...

Unfortunately, I cannot answer any of your questions. But I'm looking forward to seeing a SW Lamborghini! Good luck with it!

Oh wow...

But, but, "up"-cycling fast food garbage is so, SO GREEN.
Yeah, no, that's garbage.

And you made the right call not blowing the seller up.

But only as long as you received what you purchased in the condition in which it was described.

Thank you. the chassis was painted with black base coat then cleared with cheap automotive clear

Derek, who was in charge of the paint?

While searching ebay, I came across this pile of Team Car parts. Since I had most of the parts needed, I decided to go ahead and rebuild it. And since I don't actually have a Team Car, it made the decision easier. The shock towers and nylon parts were all purple, so that had to go. The parts lot cam...

Wow. That is really cool.