RC10Talk - The Net's Largest Vintage R/C Community

I had the same problem with some 3D printed arms. I used a 1/8" Rotozip blade in a drill to open them up. It took longer than I expected.

It gets worse , I'm thinking gRassC10

15mm longer arms and the gearbox is free floating :D need to make a panhard rod to stop lateral movement , top right arm is pretty close to the motor so I'll move it outward 4mm at the axle end , the arms came out more parallel than I planned anyway , the JRX2 arms flare outward more and that's the ...

@Dave.Geitner on Facebook

Keep it nitro son, serioulsy!

After some feedbacks and further checks on the pictures, I decided to review the model slightly to make the chevron profiles different... I also included some lettering (a plan under the surface, a text, an extrusion, shaved with a revolve at an offset of .5mm of the surface of the tire). https://i....

Got eyes on this Saturday. It's a dream come true up close. Realizes a long time dream! Runs decent too, if you're into actually running R/C cars... I just like to look.

This is my parts lot Team Car. https://www.rc10talk.com/viewtopic.php?f=35&t=46399 Mods are limited to RPM front arms, GT rear carriers, T3 slipper, and Vintage RC towers. Electronic consists of Tekin esc and receiver, Futaba S132 servo, and a Reedy Tru Stock motor. The body is a JConcepts Prote...

I had this car for quite a while. Last year I stripped it down to the chassis and completely rebuilt from there.
Build thread https://www.rc10talk.com/viewtopic.php?f=35&t=46632







Chuck

At the IconicRC Revival weekend I got to hold Craigs Detroit 91 Stealth car that he still has, he is looking on restoring it. While I had it I took some photos of it that you might enjoy. https://lh3.googleusercontent.com/pw/AL9nZEVnfLMZk5zD6aK3Tf5KoDJiKTRih2gqywi30gai0nk7rXWOdUBzvdXmMvJOuPdmxQUWqfK...

I picked up a TERX 75AM and TSC 411P set. They came attached to a nice 12L carrying case. I'll probably look to see if someone else needs this nice 12L because I have a few of them already.
.

Got some new RC10 universals from JC Racing. It is kinda weird, as I have never actually seen universals that weren't completely worn out.

This is my g R ass C10 , no genuine RC10 parts were defiled in this Heretical abomination , its all 3d printed along with the 5 link rear suspension thats designed as a visual nod to the JRX2. 20220905_132046.jpg 20220905_131401.jpg Full build thread https://www.rc10talk.com/viewtopic.php?f=32&t...

Hi all, To change, a small chassis (1/8) that I unearthed via FB and a Greek enthusiast who was kind enough to sell it to me as I wanted, that is to say without what can be associated with nitro (engine , tank ...) This is an SG chassis and the model is "PRIMA". Simplistic chassis moreover...

The Dom.