RC10Talk - The Net's Largest Vintage R/C Community

Hi everyone, I present to you my freshly built Team Associated RC10FX. This model was released in Japan only and is essentially an RC10 Championship Edition with a few extra parts not included with the American (and everywhere else except Japan) release versions. The extra parts that were included i...

MPP was a local Hong Kong brand in the 90's...........it produced a lot of hop-up parts using 6061 aluminium & nylon 66.............I would say the quality was acceptable (far better than GPM ........at least the screw holes were at the correct place)........... :) the A-arms were the most famou...

Here's a Pro-Line tire and wheel application chart which is dated 1990 so pretty close to the 1991 catalog.

I have one with the underbody, don't think anybody is reproducing these as the guy "VansInvent" warned anyone to be carefull not to repro any of his shells but then hasn't made any bodies as far as can be seen for 4 or 5 years. This is my Warrior body with underbody and it was a couple of ...

Nice!!! looking like a MIP month!! Are you looking for the wood core towers as well as someone else I know?

Hey Andy, I can't confirm who made the chassis but a good guess is that it is a 'Team' item. The extra cell slot on the left side and the enlarged portion around the front right area of the chassis suggests this was done to allow more room for the steering servo and receiver. Judging also by the top...

Yep the Fastrax top deck was designed for European tracks especially the UK it definately helped for a stiffer chassis I believe Craig Drescher came up with the design and it was sold under CML/Fastrax brand

I did not realise that the XXX4 bagged Losi a world championship! Call myself a big Losi fan!?

Great scans though, many thanks.

That Harris kid looks a little familiar in the "racers on the radar" section.

I have the material, and uni .100 with 20 deg kick up

Looks like a great start Jake, you going with the Retrofit trans?

Also note that some of the parts for the Sports truck are compatible with the Type-R, but not all (some have very different shapes). Type-R vs. Sports truck: Differences: - The whole gearbox is different, including the motor plate, rear bumper, hinge pins and the mounting holes where it attaches to ...

Thanks guys for all your well wishes.