RC10Talk - The Net's Largest Vintage R/C Community

Getting closer now. Got the spindles changed to buggy length. Also swapped the steering ballstud to the underside of the carbon steering rack.

All black titanium turnbuckles with RPM ends. Very thankful for JC Racing. They have made it so running and racing these vintage cars is so much easier.

I'm curious to know how these handle compared to the Pro Se and later XX. anyone driven one yet? I have! :D 20250412_191357.jpg 20250412_191433.jpg 20250412_191458.jpg 20250412_192050.jpg I used the replica steering for my first run. Ran into clearance issues that limited me to 50% of steering lock...

Inspiration for the thread title.

I recently bought and built this Fan RC FR-01 Blue Version kit. I added the Fan RC forged carbon chassis, towers, transmission brace, and battery brace. I also added a Jconcepts motor plate. Besides the above upgrades, I built the kit basically stock. I swapped just a few pieces of hardware for alum...

I feel like the Brits go off the deep end with some of their scrutineering in these revival classes. I've said it before and I'll say it again, make rules simple, over regulating everything just makes everyone's life more annoying. Who wants to sit there teching every car? Our vintage racing here i...

soon

the best available right now is the Team car, as it has the correct transmission. If they do further models, like a worlds car, that will also be good.

1994 RC10T Team Truck. Reedy Rage 24, 27 turn, 24 degree, brushed stock motor geared 20/87. MIP CVDs, GT steering bellcranks, Tekin G12c III esc, Reedy low profile stock pack, Panther rib tires in front, JConcepts Flipouts in rear, battery cup moved forward for a seven cell nicd pack, Lipo ran full ...

Stadium Truck Losi LXT (2nd hobby grade rc I've ever owned) IMG_20250415_172036613_HDR.jpg IMG_20250415_172113087_HDR.jpg IMG_20250415_172117836_HDR.jpg Chassis: it's mostly period correct Running the old LRM transmission with original single pad slipper, no hydradrive installed. Graphite rear arms,...

Y2K Entry (any rear motor 2wd buggy from 2000 onward) Gforce Genova - Masami Replica (I bought this kit in Japan while on vacation) Screenshot 2025-04-15 235325.jpg IMG_20250415_171911304_HDR.jpg IMG_20250415_171935006_HDR.jpg (action shot courtesy of Nick Devitto) Chassis: I did nothing to this car...

2wd 17.5 Entry Losi JRX Pro IMG_20250415_172356292_HDR.jpg IMG_20250416_184443829_HDR.jpg Chassis: There's a bit going on with this one. Chassis was narrowed by a previous owner. Has a Factory Works Lipo battery mount, Vintage RC Carbon shock towers, DHawk aluminum front bulkhead, JC Racing front ar...

I actually have a jr2 chassis with the sides cut in my pile of spares. Kinda wish i caught tou before you shaved the sides on yours lol. Thanks for the offer. I have a few more Jr2s including a NIP in the stash, so it was a bit relaxing to cut on this one. The bottom is pretty nice, however, so not...

Forgot to mention, we have the RC10 4WD chassis braces in stock now as well. These do not fit Ten4 or any other platform

https://factoryworks.com/shop/ols/categories/team-associated-4wd

Slow progress, but it’s now just waiting on some alloy posts as I had an issue with a body mount screwing into the FW post where the nerf bar swings away. I decided to fit some thumb nuts on the front of the battery straps, allows quick loosening to slide the battery out. They are a bit bigger than ...

Getting closer. I'm loving the yellow wheels on this car. I was able to use a magnesium slipper kit I had leftover from a TLR 22 build. It should work well. Wing mounted with new HPI mounts and a modern wing. I'm not sure how I'm going to mount the electronics yet. I'm unsure if I can fit them all i...

Sneak peak of the scheme