RC10Talk - The Net's Largest Vintage R/C Community

Was just digging through another junk box and found an RPM gear cover that I got in a parts lot. Turns out, it was for a B4.
Also found some nip diff rings and idle shaft for a B4. They were marked as being for a SC10, which shares several parts.

Instead of dealing with adapters, CRP still makes axles for this.

They fit RC10, trailing steering blocks and have the correct Tamiya axle dimensions. They have standard buggy, wide-track buggy, and truck versions.

You can also do a WOIN style rear. RPM width arms, original arm mounts, B44 CVD's, and B4 offset wheels.

Naturally I don't have a 27mhz AM radio 🤣 Luckily, all 27mhz AM (hobby grade) stuff is compatible. Everybody's stuff works together. You can even use Xmods crystals to double the number of available channels. But don't try the Xmods transmitters, the programming is different. Now that most people a...

I wouldn't give it a second thought.

Managed to fit one of those $20 Injora transmissions on a RC10 (going to be a truck). I had to clearance the gear cover a little, to allow more upward movement of the half-shafts. Screenshot_20230801_192132_Gallery.jpg The half-shafts came off a ECX Torment and the carriers are from a Traxxas Stampe...

Frankentruck wrote: ↑Tue Aug 01, 2023 9:08 am Did the skin options hide somewhere, or are they no longer compatible? I normally use acidtech. If no longer available that's fine. Not looking to cram a bunch of extra work your way.

On my android phone, they are in this drop-down menu.

Early 2000s?

Why are we taking about new stuff?

Managed to fit one of those $20 Injora transmissions on a RC10 (going to be a truck). I had to clearance the gear cover a little, to allow more upward movement of the half-shafts. Screenshot_20230801_192132_Gallery.jpg The half-shafts came off a ECX Torment and the carriers are from a Traxxas Stamp...

Got it functional for now. I picked up a Losi/Horizon esc/receiver and transmitter for cheap a while back (bought on a whim and never used it). Then I dug out an old JR servo and Team Associated Power 20 motor. Screenshot_20230806_161507_Gallery.jpg Found the original body from my Team Truck, then i...

I don't think I want to use stadium truck wheels. I was thinking of trying buggy wheels. I want a low stance. Any suggestions are welcome. Hex mount? These are RPM Revolvers, crawler wheels. They are about the same width as buggy rears and available in two offsets. The tires are Duratrax Banditos. ...

TQ10, built from a bare chassis. Instead of an original, I went with a (somewhat) racer. - Andy's arms, Hogue bellcranks, A&L/ Factory Works towers (tall front for 0.71 shocks and Andy's arms) and transmission brace, and Pure-Tech strap. - TBG body and MCI decals, in semi-box art. - JC Racing wh...

If you can find one, a JConcepts motor plate would look at home there.

morrisey0 wrote: ↑Tue Aug 08, 2023 4:18 pm Four entries for BOTM so far! You have a good looking car sitting around .............. enter it!!

Does that mean that I need to delete my entry?

Was out driving the junk box mutt, power-slidding through my neighbors long (300'+) gravel drive. All of a sudden, the truck came to a complete stop. Somehow, this big ass rock (23X18X11) managed to get jammed in between the wheel and control arm. Screenshot_20230808_201459_Gallery.jpg I had to remo...