RC10Talk - The Net's Largest Vintage R/C Community

They make plastic safe Loctite. If you read the SDS, it's just CA glue.

But yes, the solvent in regular Loctite will damage plastics.

Eh36 wrote: ↑Thu Jan 06, 2022 9:39 pm

GoMachV wrote: ↑Tue Dec 12, 2017 12:59 am Here’s the tower set (also shown is one of my trans braces)

Good afternoon my names Elriken Hines I was wondering if I could get those quad rc10 shock towers are they ebay. Thanks

You can get them from Factory Works on Ebay or contact him here directly.

And search for "set screw" instead of grub screw.

Click, if you dare.

https://youtu.be/XgztfRBc2jM

https://www.amainhobbies.com/traxxas-slipper-tension-spring-tra1994/p-qqqwqsyqpzxxactz?gclid=EAIaIQobChMI_begn7Oq9QIVQbyGCh3r5wKyEAQYASABEgK44PD_BwE

Possibly.

I have an old one somewhere. I'll check fitment later.

The Traxxas spring is a little larger diameter but it does fit. A piece of 3/16 tubing will fit inside of the spring. If I were going to try one, I'd use a short piece of tubing as a locator. Screenshot_20220111-155151_Gallery.jpg Screenshot_20220111-155207_Gallery.jpg Looking at Amain, there are a ...

It looks like you shot it with a .410

JosephS wrote: ↑Sat Jan 15, 2022 3:55 pm I wonder why they didn't pack those in as well.

Because it was only $1.50, retail.

Incredible_Serious wrote: ↑Sun Jan 16, 2022 2:40 am

THEYTOOKMYTHUMB wrote: ↑Fri Jan 14, 2022 10:49 pm My ultimate dream is a chip in my arm that arm that tracks everything.

You want something in your arm that tracks everything your arm does???? You can't see how this might lead to issues for YOU?

I feel sorry for the person who assigned to monitor what his arm does.

Send any first Gen RC10 compatible parts to me, it will make room for future purchases.

About time.

Next question is what kind of gear ratio to use , I was using a 13t pinion with a 54t spur giving 4.15/1 , it felt over geared so on instinct I ordered an 11t pinion to give 4.9/1 , that still seems high to me but I've never driven a rig like this , anyone have a pointer on gear ratios for this wit...

54/9 (6/1) is the gearing that I chose for this car, with an 11T triple. However I intend on running slightly taller F1 rubber tires.

https://www.rc10talk.com/viewtopic.php?f=33&t=46756

Although it's intended for automotive purposes, the gear ratio and tire diameter calculators work with anything.

http://www.wallaceracing.com/gearcalc1.php