RC10Talk - The Net's Largest Vintage R/C Community

Welcome aboard!
And way to go, jumping in with a coherent thread including nice pics
Rare these days.
Good luck with the cleanup.

After two weeks I'm finally finished with what was originally intended to be a "short, quick project" that turned out to be anything but. Most everything else I do on my CNC is simple flat piece machining, like cutting out the shock towers from carbon fiber. Suspension arms are entirely di...

In admiration of 1300GT's 4wd SRB, I'm starting on my own attempt at building a similar car. I figured out a B4 slipper gearbox setup in this thread - https://www.rc10talk.com/viewtopic.php?f=32&t=44855 Now I'm mocking things up for the chassis. 2 3D printed replica MIP gearboxes, 3D Printed fro...

They are jc rc10 with rc10 front axles

Next up is the installation of the front shock tower, I-arm brace and front suspension. No issues during installation and it is starting to look like an off-road buggy now. The Team Suzuki aluminium steering parts work very well and imo, look good against the silver surface material. https://live.st...

Mr. ED wrote: ↑Sat Jan 23, 2021 2:18 ambroken link

Try this... http://vintagelosi.com/PartsList_files/dahms_catalog_93.pdf

https://www.shapeways.com/product/SWTBXTJER/ultima-mid-rerelease-conversion-kit-v2?optionId=153718417&li=shops
This is from Mr. Ed's, he's a member here.

Hi! Since this seems to be one of the only forum threads I can find about this car so I thought I contribute to the comunity with a 3D-model I made for the Kyosho Mantis. The purpose for this part was to enable me to use a hardcase lipo. I know it looks kind of wierd (reminding me of a Tamiya-chassi...

I'm really sorry for your loss Dadio, it's always difficult saying goodbye to a pet that has been a part of the family for any length of time. We used to live in Alabama a few years ago and there was a shelter nearby that had a pretty high euthanasia rate. Before we even moved down there, a friend o...

Ahh I finally found your post for the build. Mine is coming along slowly but surely. I plan to run a shorty pack with the motor in the stock position. I'm getting around the fact that the battery will stick out some on the left side by making a bottom "tub" out of carbon plate. Once again,...

Here she is as a roller .....

no those arms were an upgrade from race prep.

https://www.instagram.com/p/CQ-sdKmM8j8/?utm_medium=copy_link

The PLA parts all survived a race night! Check it out, someone even recorded videos of the races. Here's the 2nd qualifier I ran. The truck and the track felt the best in this run. I even managed to work myself up to 1st in the heat until the announcer called it and I promptly yeeted myself off the ...