RC10Talk - The Net's Largest Vintage R/C Community

GoMachV wrote:Yeah the stock green hardware on the rere are especially delicate. Team KNK makes a nice stainless steel screw set for about $20 that is very nice for runners

Yeah I have KNK screws on all my builds...speaking of that I need to pick up a couple more sets

I actually ordered the 5700kv and canceled it and went with the 4600kv. I remember back in the day I nuked the diff in my JRX2 with a low turn modified. Ended up pleading with the family to take me to the hobby store while on vacation in order to buy a steel replacement. Turns out my sister's husban...

Not too much done tonight... Got the arms/bulkheads taken care of. The reason for the delay?
I was too busy playing around with this:

Sill working on my Dhawk special. But slow and steady lol. http://i23.photobucket.com/albums/b352/durb69/FB_IMG_1460382897326_zps0whzugs4.jpg http://i23.photobucket.com/albums/b352/durb69/IMAG1386_zpse9ivt5ad.jpg http://i23.photobucket.com/albums/b352/durb69/IMAG1384_zpsu98wcmhh.jpg http://i23.photo...

Super clean stuff right there. Thanks for sharing!

That's turning out really nice Jeff. I know all this aluminum is just bling but it sure looks pretty.

I stumbled upon those dhawk parts today. Maybe after I get a few more builds.

All, I starting a 'black'n'Gold' build based on a carbon chassis, vintage stealth RC10 and Dhawk gold aluminium kit. My plan is to keep everything black and gold as much as practically possible. I have the following parts waiting to be fitted: - Dhawk Gold aluminium stealth transmission case - Team ...

I know this doesn't really help but sometime way back when I picked up a pair of gold CV's. I guess the only plus to this post is there are some out there I just don't know where or who made them. I see that they look towards the silver side in the pic but that's due to the flash. They are a nice go...

Kyosho made the gold uni's for the rc10.

Following on from my other 'Graphite Custom' thread, I have decided to build up another pair of cars from my spares stash. One will be a gold pan A-stamp chassis and the other will be a Graphite. As a base for the latter I have managed to find a very tidy Graphite chassis as can be seen here. graphi...

This is how it ended so far. replaced the "original" trailing arm rear suspension mount with a standard, and used some shorter shocks to keep the body low.

Please try to keep Your enthusiasm down this time - I know it´s hard, but please try and keep the comments to a minimum

Yes, standard Dubro semi transparent = easy to get

I'll need to remember this too. We should have like a "how to" forum where the main post is how to do something like this and people can give feedback and we can keep up to date how to posts pinned fur the useful stuff.

Since there seems to be a world-wide outdrive shortage for RC10's, I've decided to try printing some from stainless steel. I bought a NIP pair from aip47-2008 (thanks again man!) and took my measurements from them. I uploaded them to shapeways and ordered a pair, I should have them in a couple weeks...