RC10Talk - The Net's Largest Vintage R/C Community

Sendcutsend is a laser or water jet cut on a flat metal, not printed. I was just showing a printed steel gear I had made is all

Sendcutsend is a laser or water jet cut on a flat metal, not printed. I was just showing a printed steel gear I had made is all most internal cut gears I've seen have a back face behind the teeth that just cant be done by water jet , unless its just a ring gear :?: Thanks! You're right about that. ...

Here is my RC10 Ten4.1, the 4wd kit from Factory Works, build with MSP RC blue chassis, nose plate and motor plate. MSP RC front and rear arms Original Factory Works motor Sanyo SCE 1800 nicad Tekin 411P Futaba receiver Futaba servo Protech II body rps20250104_170423.jpg rps20250104_170545.jpg

coxbros1 wrote: ↑Fri Jan 03, 2025 3:56 pm

Frankentruck wrote: ↑Fri Jan 03, 2025 2:26 pm It's Super Monster burrito time!
.
1000016587.jpg

What will that do to your gut!

Asking for a friend?

Not super vintage but it's Associated first official 4wd buggy. This is an early kit which has been raced a couple seasons on carpet and put away just as you see it, there is still carpet fuzz in the wheels.

This is a recreation of my late 80s Blackfoot. I put it back to the specs i raced it like back than, including the Lemans 240ST motor. It was the golden era of rc and this was one of my more memorable rc vehicles. Display body includes 5 coats of automotive clear. Messenger_creation_219B7354-C3BD-49...

International shipping via Pirate Ship is included for those overseas as well. You will probably have to pay duty or tax but we will value it low to try to help

Finally reamed the two cluster gears to 6mm internal diameter. The 3x6 flanged bearings fit perfectly. 1.jpg Full bearings in the gearbox. Mmmmmmmmmmmmm, bearings. :D 2.jpg I applied Autosol metal polish to the gears because there was one spot between the diff gear and its mate that would bind when ...

My works 91 just got dropped off. Wasn't supposed to be here until Tuesday. Had the Flu this week so I kind of forgot about it.

Well, at least this really drew out the tightwads! I kid.

Diamond One wins at Hudy! with a chain drive car designed by Dadio

For those wanting to see the chain drive, here it is fresh off the track from the race..hasn't been touched

When the new associated tc8 chassis hits production, Im gonna need a Dadio chain conversion........

Just for the sake of pushing the envelope- What was the concentration of the dye to water? I'm still a believer it was not at all scientific. i just used a coffee cup and microwave with about a half inch of water/dye. nuked until it boiled, then placed the shock tools. did not add a lot of blue, li...

Dadio wrote: ↑Thu Jan 09, 2025 12:39 pm It's a rocket car innit , how else can I vote , simply one of my all-time favourites on this forum !

The building/running thread was best of the year imo.