RC10Talk - The Net's Largest Vintage R/C Community

I received and had my students assemble the second printer for the classroom. Trying to get it on network now.

Inter-Fab Viper EX-10

Build Thread: https://www.rc10talk.com/viewtopic.php?f=33&t=48202

Thanks guys! You know, when I was 14, I did not succeed to do this properly... Then way later, I found a trick... Generally, I would use masking tape for the external side of the helmet. Generally I mask the face, and use spray paint to do this. Here it is more complex, because of the mask Bill have...

Bill Elliot sits now proudly on the Marui chassis https://i.imgur.com/ywkG64b.jpeg https://i.imgur.com/bxOgdoA.jpeg At this stage, this chassis has no electronics, the runner is not going to be this one... I did add a few details to the bodyshell using some trim line applied inside the bodyshell... ...

I did put the Shogun driver figure and bodyshell on the chassis. I've not done any work on this chassis yet, it's not clean, but there is a very good basis for nice restoration (I have a plan for a Shogun runner beside this one: this one has been lightly ran, and is in pretty good shape, at the exce...

Has to be the Tamiya shocks linked below out of there TRF division. Haven't found a better set of buggy shocks yet! They blow me away every time, although super pricey.

https://www.tamiyausa.com/shop/option-parts/rc-trf-buggy-dampers/

The budget runner brothers freshly-batteried for summer and ready for first shakedown! The brushless car features a JC Racing transmission (adapted for stock dogbones with a slight motor plate mod for pin-clearance which works great). Brushed car has stock 6-gear and an old Trinity 27t stock motor, ...

GoMachV wrote: ↑Tue Mar 09, 2021 2:40 pm Best shock that held oil the worst? Delta.
Best shock that is nearly impossible to bleed? Delta

Truer words have never been spoken!

Thanks Doug

It appears that to find any Google reference to the gear and find their site you must add "acetal" in the search terms.

And RWR doesn't use Kyosho's part #?

Anyways to beat that, shipping was 6 quid!

Chuck

I don't know if anyone remembers the movie Money Pit, but there is a great line in that movie where the contractor actually shows up to work on the "the pit," and he announces, "you won the lottery, today we work." That is how I am with my RCs; I work on one until another one win...

Save the front strut tower (waiting on the motor), it is a slider. I don't know if Kyosho's plan was just to shove all the wiring under the MSC, but that is what ended up happening to get it all to fit. I have to confess that the MSC that I got was just a generic Kyosho rotary of the era, and not a ...

I have quite a few Super Wheelies and Big Bear here awaiting for some restoration. However, my first priority is to get a white Toyota and a white CJ-7 ready as soon as possible to be able to make the single picture with all the Marui cars, including the Mitsubishi Jeep... The black CJ-7 and blue La...

Not quite in the mail..... but met up with this nice Jason bloke today, after he drove down from Sydney to Melbourne (1000+kms) to say hello... 01.jpg He dropped off some stuff that has been piling up... 02.jpg Including a massive box of Schumacher vintage parts, cleaned, categorised and organised. ...

I first saw one of these on Tamiyaclub back in 2006. First impressions were, "what were they on?" :lol: After much investigation and research, I decided that I would buy one and modify it for running. There's no way I could shelve something this weird. Navajos are hobby grade yet verge on ...