RC10Talk - The Net's Largest Vintage R/C Community

Thank you all for the advice and suggestions. I think that after some more research and reading I am going to do some upgrading to the drivetrain while this setup is still together. I think a 2.60 transmission and a VTS slipper clutch setup is going to be ideal here. Are there any links to write-ups...

Correct. When I put the rear wheels on a rubber mat, and held the wheels tight to the mat there was no slipping in the system once I spun the spur gear..

Thank you for the replies. I took your suggestion and put the truck on a rubber mat and held the wheels tight to the mat. I attempted to spin the spur gear and it was tight, with no slipping. I assume this means that the differential is tight? I did take an open end wrench to the clutch, and got abo...

Thank you for the welcome Mark!! I got it running on Friday evening. I did a little testing in my backyard with some slipping issues in the drivetrain. I tightened the diff and clutch took it back into my yard and tested again, this time with some giggles and smiles because it was hooking and doing ...

Recently I pulled my RC10T2 out of the attic and blew the dust off. I did a fairly comprehensive rebuild including a Castle Creations Sidewinder3 ESC, and an accompanying 1406 4 pole brushless motor in 4600kv. Now my drivetrain is destroyed. I need to say that I have done a V2 conversion to the Stea...

Hello all. My name is Jeremy and I live in the coastal North Carolina area. I have had a few RC cars throughout the years, but currently I only have my first build which is an RC10T2.. I originally purchased this truck in 1992 i think at the age of 12 with money I saved from my paper route. I built ...