RC10Talk - The Net's Largest Vintage R/C Community

it depends on what kinds of stuff you can get in the UK reasonably priced. Here is an example of some traxxas parts you can use for the bellcrank system: http://www.rc10talk.com/viewtopic.php?f=38&t=16582&hilit=traxxas+bellcrank what other models can you can get parts for reasonably? I can ...

Just noticed that your dogbones are awfully close to popping out of the outdrive cups with the car sitting on the table. Do they stay in when the arms are at full droop? I noticed this too but don't have a problem with them popping out although they have on the odd occasion, do you think this is do...

made a bit of progress in between my wife having a baby! Decided against clear coating the chassis as i didnt want issues with it flaking off so wet and dry sanded it and then polished up with some compound, and its come up much better than before although pictures are rubbish. Got the front bulkhea...

Thanks guys looks like I e got my work cut out to get is back up and running correctly!

Hi all, I am from the UK and having got back into RC Fast Electric Boats for a few years i decided to dust off the old RC10 i used to race when i was in my early teens. I have posted before however i need a bit of help identifying whats what on this buggy as its a bit of a mish mash between buggy an...

Thanks again, I've had this since I was 13 and from memory I had two one graphite and one rc10t both were fairly old and well used at the time but I ended up taking all the (in the eyes of a 13 year old) "best bits" to make one decent one and one which I sold on. Can someone tell me what o...

Thanks for the replies, I've used some CA and soaked the crack then clamped in a vice overnight, it's come out pretty good, I've also got 2mm carbon plate which I will use if it breaks again!

Here you go, ive just finished stripping it down and think it may be fixable as i have some carbon fiber cloth and 2 ton epoxy if i can inject some epoxy into the crack and clamp into a vice it might do the trick http://i1083.photobucket.com/albums/j397/mattwarner1979/IMG_0869.jpg http://i1083.photo...

Ok guys, having recently resurrected my vintage rc10 with brushless/lipo power ive had loads of fun until running it flat out into the back of a parked car :( Shock tower broke and i thought id got away with just that however ive just noticed the chassis has actually snapped in half at the rear towe...

Hi, I am new to all this, however I recently upgraded my graphite rc10 to brushless and decided to move on from nicads to Lipos, I've just brought a charger off eBay which came with x2 3s 2200mah 35c packs.

Will these be ok? They are half the size of my old 7 cell nicads!

Thanks

I upgraded my brushed motor for an EZRUN 13T / 35AMP ESC off ebay and it made an amazing difference!! these are available through Hobbyking i believe but i got mine from HK for a steal although it took 6 weeks to get to me.

Hi, Iam restoring my vintage RC10 Graphite and have just ordered an EZRUN 3000kv brushless and ESC Combo, its only going to be used for a bit of fun and i am only looking at using some 3800mah NIMH rather than LIPO's. I have a load of spare spurs and pinions and after a recommendation to run with th...

I've got one of these which I am sorting out, so I am very interested in this! I will Post some pics as ive sprayed it black and gold, I am stuck as to what motor as I think I put the original in a buggy which I then sold, have a spare 15t and esc which I might try, I have an x pitch prop which I re...