RC10Talk - The Net's Largest Vintage R/C Community

What size are the e clips for the suspension arm pins? I tried Associated 1/8" clips but they are too big. Are they M3 metric? Please lay some knowledge on me as none of the manuals give sizes for these. Many thanks!

After a few false starts (work and family stuff) I was turned on to getting a cheap gravity feed media blaster for $20 at Harbor Freight and using Baking Soda in it. My compressor is a 20 gallon and can go up to 125 PSI. The blaster has a operating PSI of 90 so I am in the zone. One of my coworkers ...

So I picked up a Yokomo 870c (YZ10) from a guy in a mega bundle deal and am now getting around to breaking it down and cleaning up everything before I figure out what needs to be replaced. So far it looks like only some hardware needs replacing and I ordered a stainless steel hardware kit from KNK. ...

I will most likely do the body mounts and wheels/tires and call it a day. This way I can go back and forth as desired. This was to be a shelf queen that I take out once in a while for a vintage get together for fun runs.

I have a fairly clean and intact JRX Pro SE buggy and was wondering what I would need to convert it into a JrxT. I figured the front and rear arms would need replacing as well as needing axles for the rear. Wheels and tires as well. Can someone confirm and throw some advice on where to get the parts...

Thank you very much. Old eyes and impatience is getting to me these days. RC10Talk is my oracle of all things Associated!

Thanks again.

In a recent trade I obtained what use to be a RC10L2 however it has a wider custom chassis plate, a custom made Kaydex rear brace and in-line front axles. The front axle part number is 8443. I had a set of 10L wheels in my parts stash but they have the smaller flanged bearings in them. My question i...

I obtained a very nice RC10B64D roller and have been sourcing a few needed parts. I tore it down, cleaned it, identified very few worn/broken parts and rebuilt it proper.

I will have pictures up soon as I get the new body painted.

Received the Avid collars Saturday. Standard shipping and they still got here faster than a UPS 2nd day package from within my own state. They even included a decal sheet. Very classy.

Many thanks. I ordered the Avid collars directly from them.

Already have spring cups, just need a collar adapter. I looked on Shapeways but couldn’t find it.

Title says it. I have a new in the box RC10T4 Factory Team kit I just started building and I am on a quest to update to to a 4.2. Thanks to a few here is was able to work out the front 12mm axle problem and now I am moving onto the shocks. The shocks the came in the kit are the FT standard shocks us...

Well that answers my question guys, thanks. To comfortably fit the truck, it’s wheels/tires, I will disconnect the arms on one side and bag the components. Next I will continue my quest for a T2 box and 10T box.

Hmmm that may work. Thanks. I should be getting the box by Friday if USPS is on time.

I guess I could remove the arms on one side and bag them so as not to misplace the parts.