RC10Talk - The Net's Largest Vintage R/C Community

Open To Any Manufacturer!

OK, this will be the thread for the November 2022 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

Build thread is here:
https://www.rc10talk.com/viewtopic.php?f=35&t=46671

Now I just need a motor and some matches for that rocket...
. .

Just finished this build, nothing to special, basically a complete tear down and rebuild. I will at some stage be adding period correct electronics.

Build thread = https://www.rc10talk.com/viewtopic.php?f=29&t=47208

I'm in too

Here is my proto PHM 4wd, build few month ago.
I used a yokomo yr4 m2 transmission, mounted as mid motor, and I build the other parts as the chassis, front arms and monoshock setup, rear suspension with trailing arms.
I finally use yokomo drive shaft, wheels adapter, wheels and body (hot dog one)
Lot of work, and I hope you'll like it.

RC10 E-GT conversion. Picked up a cheap slider and mostly used stuff that was laying around to finish it.

Ed (Frankentruck) hooked me up with a 3D battery tray and chassis plug.

Truck is fairly basic, with a Dynotech motor plate. I used some ECX shocks (AE springs) that were removed from my Torment.

It has a JConcepts T5M body and Proline/Schumacher tires. The neon green paint is a little different. It looks dark while inside but gets bright in the sunlight.

Electronic consists of a Traxxas TQ radio system, Flight Test servo, Arrma 550 motor, and a Hobbywing 1060 with a Team Powers capacitor pack.

Click on pics for better resolution.

Here's my RC10T..... 4

RC10 Edinger with driver Ramblin Ron with vintage graphite upgrades from the time period.
Click on photo for more detail.

My only dogfighter. It is a runner and has been used at the iconic rc revival. I have some foams and plan on running it as a touring car over winter. It was built on a budget and is a poor man's yz10. I have to be the only teenager with a yz10.

Just a relatively basic pan car build. Chassis is a Bolink Round Tracker. Little tribute to Awesome Bill!

Build: https://www.rc10talk.com/viewtopic.php?f=33&t=47720

Go ahead and get your pics up guys.

Poll is now up. Good luck!

That coors pan car is solid!

I pan-fried my brain choosing.

Tough to choose again , Kedal or Frankentruck but I'll have to think on it .

RC10th wrote: ↑Sun Nov 06, 2022 5:27 am Here's my RC10T..... 4

I really like this. My T4 might need some similar tweaks.