RC10L

[Bent]

Here it is Just a stock 10L that I picked up a few years back for 25.00






Yes the pics are old but nothing on the car has changed. Im thinking of redoing this little car but have no knowledge on these any help and information would be great.

An crappy cell pics that I just took

[bearrickster]

have no knowledge on these any help and information would be great.

I love that Vintage body I did one like that years ago for a guy. You should just send it to me I will take care of redoing it.

[Bent]

Lol yeah I know you would then I wouldn't have a "project" this clean.

[bearrickster]

no but will look dam good on my shelf next to my two

[Bent]

Yeah can't wait to see it next to my 10

Thanks for the compliments.

[durb69]

Thats clean! You should strip that baby down and make it like brand new again!

here is mine. after a lot of loving. Mine looked just like yours when i got it.
Before

After

[Bent]

Thats clean!

Love the wheels! It will get stripped, may get dipped, and will certainly look good when im done. This poor thing has been ran once in the kitchen and stuffed in a box the rest of its life Im ashamed. But now i have a plan for it and will slowly get it done.

Here is the 30.00 body. How do you guys get the body to align perfectly, so that after you paint you know where to drill I been told use a marker but I tend to FK it up. Any suggestions?



Also who sells that front brace? I know Ive seen them on here somewhere.
Also How can I restore the shine to the Carbon fiber?

[rctenracer]

I trim and fit bodies before paint.

[durb69]

ill find the link. I made a how too on the polishing of the carbon fiber. That front brace was made by me. I don't really sell them. Although i have in the past sold a few on ebay. If your a member of the BST section you could PM me about possibly making one. I usually drill the mount holes and mark out the tires and body before paint. I draw with a sharpe on the outside and then after painting i can trim as needed. I have successfully drilled and cut before and after paint. You deff wanna mark the body before paint though!!!

[durb69]

I found the link for you http://www.rc10talk.com/viewtopic.php?f=37&t=26053
This is a build thread i did on the first complete rebuild/restore i ever did. In the thread i wrote a how too and explain pretty much every step i took in detail. Feel free to message me with any questions at all that you have. I most likely will be able to help you out

[Bent]

I found the link for you http://www.rc10talk.com/viewtopic.php?f=37&t=26053
This is a build thread i did on the first complete rebuild/restore i ever did. In the thread i wrote a how too and explain pretty much every step i took in detail. Feel free to message me with any questions at all that you have. I most likely will be able to help you out

I do have BST Access and have for a year or so now.

Thanks I will need all the help I can get.

[EvolutionRevolution]

I trim and fit bodies before paint.

Same here. Figure out where the body holes have to go, mark them with a sharpie, make holes, cut out wheel arches.

[durb69]

I found the link for you http://www.rc10talk.com/viewtopic.php?f=37&t=26053
This is a build thread i did on the first complete rebuild/restore i ever did. In the thread i wrote a how too and explain pretty much every step i took in detail. Feel free to message me with any questions at all that you have. I most likely will be able to help you out

I do have BST Access and have for a year or so now.

Thanks I will need all the help I can get.

cool man contact me any time.
for help or if you want some BLING parts lol

[Bent]

Got the body trimmed and mounted just trying to figure out how to make the chosen color combo look good.

[Bent]

Parts will be sitting in peroxide first thing tomorrow. And then I might rit DYe some parts still trying to talk her out of that one.

Looks like it will be a drag truck. That's the only type of racing I can do with it around here.