The ultimate Mini JRX2 thread

The place for all things Losi.

Moderators: scr8p, klavy69

User avatar
JK Racing
Super Member
Posts: 4603
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 103 times
Been thanked: 200 times

Re: The ultimate Mini JRX2 thread

Post by JK Racing »

RogueIV wrote: Mon Mar 06, 2023 4:28 pm It's a shame they didn't go with 1.6" wheels, could have used the JC RC10 tires in that case. You could also probably stretch the JRX2 tires onto the JRXT wheels.
We used to mount 2.2 tires onto 2.0 wheels - I think a 1.6 on a 1.5 is a no brainer :)
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

User avatar
juicedcoupe
Super Member
Posts: 2989
Joined: Sun Aug 16, 2020 4:05 pm
Location: Pascagoula, MS
Has thanked: 231 times
Been thanked: 1747 times

Re: The ultimate Mini JRX2 thread

Post by juicedcoupe »

RogueIV wrote: Mon Mar 06, 2023 4:28 pm It's a shame they didn't go with 1.6" wheels, could have used the JC RC10 tires in that case. You could also probably stretch the JRX2 tires onto the JRXT wheels.
Those are 1.7.

Kyosho Scorpion/Tomahawk/Beetle rears are 1.6 but are a little wider than the JConcepts tires.
Always looking for new and interesting ways to waste money.

User avatar
Frankentruck
Super Member
Posts: 2600
Joined: Fri Feb 19, 2021 9:59 am
Location: Texas, USA
Has thanked: 1589 times
Been thanked: 1770 times

Re: The ultimate Mini JRX2 thread

Post by Frankentruck »

Maybe Hornet or Grasshopper rear tires?
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet

"I love the effort, but it sure looks like you took the long way around to a tub again"

User avatar
MarkyDents
Approved Member
Posts: 1023
Joined: Sun Jan 10, 2021 11:52 am
Location: Staten Island, N.Y.
Has thanked: 1361 times
Been thanked: 511 times

Re: The ultimate Mini JRX2 thread

Post by MarkyDents »

Looks like our LHS that my buddy and I ordered our from got em in so hopefully we’ll be able to grab them this week. Looking forward to seeing what numbers we end up getting.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

Not much to add today, but I did run a few practice laps with the mJRXT and it seems to do very well. Just a note that the added leverage of the big wheels does make popping ball cups a not uncommon occurance. Also it's by far the fastest of the brushed Losi RTR minis.

Also it goes good with the Original Ivan Ironman Stuart's Pro OFFROAD Arcade
IMG_20230309_222300806.jpg
Also finally got a decent run with the Mini JRX2m mod. It's become a honking chonker of a buggy, now weighing in at 1.35lbs. This is nearly a 1/4lb heavier than stock and helps keep this thing under control. This is not what I'd normally do but it seems to work well, it flies better and is considerably more stable. The resin printed parts seem to be holding up well too.
Consistency is the key I keep misplacing.

User avatar
TRX-1-3
Super Member
Posts: 1743
Joined: Sat Mar 29, 2014 12:13 pm
Location: USAG Humphreys, South Korea
Has thanked: 1399 times
Been thanked: 764 times

Re: The ultimate Mini JRX2 thread

Post by TRX-1-3 »

IRONMAN OFF ROAD!!!
That was THE game to get on at the pizza joint when I was a kid. There was a line!
Hope you're doin' something fun.

1911Colt
Approved Member
Posts: 787
Joined: Fri May 06, 2022 9:11 am
Has thanked: 1032 times
Been thanked: 488 times

Re: The ultimate Mini JRX2 thread

Post by 1911Colt »

TRX-1-3 wrote: Fri Mar 10, 2023 4:16 am IRONMAN OFF ROAD!!!
That was THE game to get on at the pizza joint when I was a kid. There was a line!
:lol: :lol: :lol:

One of many games I was terrible at, but it was very, very cool!

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

1911Colt wrote: Fri Mar 10, 2023 8:18 am
TRX-1-3 wrote: Fri Mar 10, 2023 4:16 am IRONMAN OFF ROAD!!!
That was THE game to get on at the pizza joint when I was a kid. There was a line!
:lol: :lol: :lol:

One of many games I was terrible at, but it was very, very cool!
Definitely a throwback and period for the JRXT! Local track, RC Madness, has this one. It's really cool!
Consistency is the key I keep misplacing.

User avatar
MarkyDents
Approved Member
Posts: 1023
Joined: Sun Jan 10, 2021 11:52 am
Location: Staten Island, N.Y.
Has thanked: 1361 times
Been thanked: 511 times

Re: The ultimate Mini JRX2 thread

Post by MarkyDents »

My friend was good enough to pick our trucks up the other day. They had gotten in 6 of them. Mine is #2129. Turns out it’s on the box as well. He said even though all 6 were in the 2000’s, the numbers were all over the place. Mine and his are 100 apart and they were the closest together. Strange.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

MarkyDents wrote: Sat Mar 11, 2023 2:29 pm My friend was good enough to pick our trucks up the other day. They had gotten in 6 of them. Mine is #2129. Turns out it’s on the box as well. He said even though all 6 were in the 2000’s, the numbers were all over the place. Mine and his are 100 apart and they were the closest together. Strange.
Yeah the numbering is all over. I know the ones we got here at RCM were in 2000 and 4000 ranges that I've seen. I own 4113 and 2397. The numbers are kinda meaningless to me, I'm still going to run them, just with modded JRX2 motor plates.

In other news attempted to use the servo saver Losi has listed as a replacement for the 1/16 Mini Drag car, LOS211035 which has a much better, cam style, design. Unfortunately it turns out they dropped the ball and this part is for 25t servos. Stock servo in all the current Losi minis is the Spectrum SX107 which has a 20t shaft.
Consistency is the key I keep misplacing.

1911Colt
Approved Member
Posts: 787
Joined: Fri May 06, 2022 9:11 am
Has thanked: 1032 times
Been thanked: 488 times

Re: The ultimate Mini JRX2 thread

Post by 1911Colt »

Are these hard to find in some areas? The LHS has 2 sitting there, on the shelf, not getting any attention. I am not an RC car speculator myself, but someone might be able to stash them away for a year and triple his money when they are all gone.

I wonder, is 5000 really a "limited run", or is that all they figure they can sell? I have no idea what a "normal, unlimited" production run for an RC car is.

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

1911Colt wrote: Mon Mar 13, 2023 7:45 am Are these hard to find in some areas? The LHS has 2 sitting there, on the shelf, not getting any attention. I am not an RC car speculator myself, but someone might be able to stash them away for a year and triple his money when they are all gone.

I wonder, is 5000 really a "limited run", or is that all they figure they can sell? I have no idea what a "normal, unlimited" production run for an RC car is.
Yeah that's kinda what I was wondering too. I don't really know how many of any other model they sell to really compare with. I do Know that the real car I drive everyday is more rare than the JRXT though lol.
Consistency is the key I keep misplacing.

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

Painted a body. It's not perfect but at least it's different. Decals distract from my sins. I'm not going to even talk about hte 1/10 body i was working on...
IMG_20230313_235649500.jpg
IMG_20230313_235626104.jpg
Consistency is the key I keep misplacing.

1911Colt
Approved Member
Posts: 787
Joined: Fri May 06, 2022 9:11 am
Has thanked: 1032 times
Been thanked: 488 times

Re: The ultimate Mini JRX2 thread

Post by 1911Colt »

RogueIV wrote: Tue Mar 14, 2023 1:04 am Painted a body. It's not perfect but at least it's different. Decals distract from my sins. I'm not going to even talk about hte 1/10 body i was working on...
IMG_20230313_235649500.jpgIMG_20230313_235626104.jpg
I consider decals to be the "last refuge of the untalented painter". :lol:

(Saying that about me, not you.)

User avatar
RogueIV
Super Member
Posts: 533
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1119 times
Been thanked: 459 times

Re: The ultimate Mini JRX2 thread

Post by RogueIV »

1911Colt wrote: Tue Mar 14, 2023 8:04 am
RogueIV wrote: Tue Mar 14, 2023 1:04 am Painted a body. It's not perfect but at least it's different. Decals distract from my sins. I'm not going to even talk about hte 1/10 body i was working on...
IMG_20230313_235649500.jpgIMG_20230313_235626104.jpg
I consider decals to be the "last refuge of the untalented painter". :lol:

(Saying that about me, not you.)
I really need to ditch rattle cans, the inconsistency with them is killing me. That and masking that decides to pull up on me mid painting is another thing that never fails to boil my blood.
Consistency is the key I keep misplacing.

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Ultimate RC10 Body Thread
    by LTO_Dave » » in RC10 Buggy Forum
    37 Replies
    12208 Views
    Last post by jcwrks
  • Ultimate RC10 Weight Thread
    by LTO_Dave » » in RC10 Buggy Forum
    2 Replies
    781 Views
    Last post by JK Racing
  • Ultimate Tamiya Egress Thread
    by TokyoProf » » in Tamiya Forum
    1 Replies
    1379 Views
    Last post by mtbkym01
  • My Ultimate JRX2
    by mrlexan » » in Losi Forum
    31 Replies
    4794 Views
    Last post by Lavigna
  • The RC-Mini 4wd thread!
    by Lonestar » » in Other Makes/Models
    6 Replies
    1680 Views
    Last post by RC10th
  • New shock tower Mini JRX2
    by CustomCarbon » » in Losi Forum
    3 Replies
    228 Views
    Last post by isaidme
  • JRX2 projects thread
    by HotRodJosh » » in Losi Forum
    28 Replies
    2192 Views
    Last post by Heffay
  • NIB Sealed Original 1989 JRX2 Build Thread
    by huminski » » in Losi Forum
    90 Replies
    12288 Views
    Last post by huminski

Return to “Losi Forum”

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot] and 15 guests