I know there are holes in the list, but we can continue to build on this as we go. It's fairly comprehensive thus far, so hopefully this can help those of you who are looking for the general information on these motors. Feel free to offer...
I recently picked up a MTM losi motor. There were two to pick from one had Team Losi stamped and the other just had japan stamped just curious on the difference both cans look identical otherwise
Last post
They do. I clearly put that in the item description.
Hi all,
months ago I've bought this abused Tamiya Acto Power Off Roader 2wd Motor.
Now I'm in the condition to full restore it because I've bought a new endbell (with new brushes), a brand new armature and a MCI sticker to refresh also its...
Last post
You could make a motor flag. A brass rod with a steel square on it. You insert it instead of the rotor and the flag should point to the center of the magnets.
The magnets don't just lose magnetism, they lose center too.
Would give you a feel for how...
I have been hunting for a nice Tekin Titan ESC and took a chance on an untested unit. It passes power to the steering servo and the light indicates that the throttle calibration works, but it won't turn a motor. Does anyone know of someone that does...
Last post
I removed the leads so the top of the case could come off. It looks like this ESC was trying to toast marshmallows and make s'mores.
.
PXL_20230125_230028030.jpg
I have another version of the same motor.
Label on it says:
- part number 5718
- 18x4
- 27000rpm
Same specs as posted above.
Actual dyno run data on a sticker (performed not by me): 29800rpm, 162w, max. efficiency 73.8%....
I have some Tower servos, and they have square mounts on them. Anyone know of another manufacturer that does/did the same? Or directly where to get horns that would fit?
The graphite team car I’m semi-restoring has a Futaba s131sh. Very little info about it or dead links. The forum has a few posts but mostly equipment lists.
from what I know so far:
1. It’s a good servo for the era
2. Matches the timeframe of the...
Last post
Are they pretty tough units? Do they need rebuilding?
They were popular in their day. Like most Futaba stuff, they are made well.
As long as it operates smoothly, I'd use it. If it's sticky, clean the gears and re-grease it.
Have an NOS PTI stick pack but no markings anywhere indicating NICD or NiMH. Any way to tell without cutting into shrink wrap?
20230113_151129.jpg
Last post
I was leaning nicd as well. I measured the voltage just for giggles and it was at 4V. I would have thought it would be dead all these years. Just for curiosity, I will slow charge it and see what happens😉
Got this motor with a bunch of other old motors. Have never seen any similar before. Does someone have any info about it? Label only says E power engine .
The comm is unfortunately worn out, however the motor still runs somehow.
Thanks!...
I am looking for some great pics of the Sanyo Fast Charging Red SCR NiCads, but am actually having a hard times finding any. Lot of off centered and small pics, but nothing that I can work off of for scale and such for trying to replicate the...
Last post
I was sticking with the red Cadnicas on this one because I thought red with black text would be easier to work with for some reason, but was failing to find a covering that I really liked that I could put a sticker on, and nothing printable was...
This Novak Polaris was in my box of stored RC stuff. I did find a few threads about it but not much of performance. I'm trying to use mostly vintage electronics for my RC10 graphite team runner restoration.
How good is this unit compared to period...
Last post
thanks guys. I feel like the kid in me having fun with my RC stuff. Just slower and with less hair. :lol:
My little brushed motors collection is growing up, nothing special but recently I've made some additions and I'm considering to store them properly. What do you use for keeping your motors in order?
Last post
I am not a motor collector at all
Good thing! If you have that many by NOT collecting.... :lol:
BC2258DE-DC84-443C-8867-1621BA529D9F.jpeg A3328342-8B6A-4426-8AB0-984DC82C093F.jpeg
Anyone know what’s up with this ? Never seen one before. Said to be Japan market only unit.
Last post
Early ones were Trinity tooling for the Japanese market. This one has a unique alloy endbell that I don't recall seeing in the US market.
I've noticed that some of my brushed motors (mostly used, some refurbished) are easy to spin by hand than others. I'm deeply ingnorant about electrics and I'm prone to think that it's something about magnets. Am I right...
Last post
Beside magnets it´s also the airgap between the armature and the magnets what affects how easy you can spin by hand.
And there are big differences for the airgap.
Talking about differences of airgap at motors from the same company at similar time...
Got this motor together with a bunch of old brushed motor, cleaned it and checked if it works (yes!:). The label is unfortunately damaged. Will do comm cut next! Does anyone have some info about this motors? Maybe some old add? From the info on the...
Last post
88BC74C6-7701-4CD1-A868-D3ADCAF5E48F.jpeg
Came across another one, suspiciously familiar car in this ad….
Check out the address as well.
While testing some vintage Futaba Magnum and Megatech Jr transmitters, I noticed that the batteries and battery holders were very tight. Like separating the transmitter handle tight.
After doing a little research, I found that AA batteries are...
Last post
I'm still working on the AAA adapters but I did find some that fit.
Went by Dollar Tree and bought some cheap HD batteries.
The Panasonic Heavy Duty (not alkaline!) are 13.8mm
The E-Circuit Heavy Duty are 13.7mm. Looking at the display, I think...
Finally found one! But I’m wondering if it’s all original. Please see pics. Seems like an older Trinity endbell with Yokomo springs, yokomo timing ring and Trinity or yokomo can. Let me know what you think
Last post
Ok. This is what I have. When I opened it I noticed it was a double turn. Can and end bell match this too. Thanks a bunch
Older MTM, 19x2. Team Losi/Japan on can, just positive symbol and no brush hood heat sink.
I have recently acquired this vintage GM HEL 4000 Universe ESC. I know that this exact same speedo appeared on here several years ago.
The seller (maybe a member here as well) sent the ESC with a copy of the German manual. I still can't properly...
Last post
Managed to get it to run. Apparently the 'alarm' from the instruction is made by the motor whining (yes, after you connect it), similar to some of the modern esc (Castle). This ESC is really one of a kind, probably very similar to the Tekin 410K. I...
Hello everyone,
I'm new to this forum and would be greateful for help in identifying some brushed motors I own (really enjoy the feel of vintage tech).
Recently bought a bunch of old motors on ebay and trying to make them fit again.
Can someone...
Last post
Yeah, these motors were imported to, and sold in, the US by Polk Hobbies under their Aritso-Craft brand. You can find adverts for them in some 1988 issues of the RCCA scans that give an RPM rating, and what class of RC the motors were meant for. The...
The Trinity EX Tech Experimental motors usually come with grey can and endbell and golden brush setup.
I got a different version with purple can and endbell and silver brush setup.
The label is exactly the same as with the other version.
I tried to...
Last post
But you could find GM labels on Trinity/Epic or HPI cans.
Or even certain Kyosho cans. But those are super rare because they were prototype or team motors and never went to the public.
Actually I own a good collection of old brushed motors, but there is not a single Igarashi based motor which comes with the tape to hold the endbell.
Now I have a couple of projects for such Igarashi based motors but I wonder which tape would be...
Last post
Living in Europe it seems Mylar tape is not that easy to find.
I have seen something what seems to be similar or same as Mylar but wide is 12 mm.
Today I found one of my Trinity motors which also uses black tape. It is 1/4 .
But I have seen others...
One of the reasons I dislike brushed stock motors is the non-rebuildable construction. I know an endbell can be popped off, but it doesn't usually go back on well or fit tight again. So I have a bunch of worn out motors that I'm thinking about...
Last post
I don't give up on motors until they're basket cases. The Competition Stock is intent on being a smoker. The 240ST had some running issues and is rusty. If someone has a use for a box of non-runner motors, PM me a mailing address. Most of them don't...
I customized and calibrated my motor dresser, it just wasn't cutting it in stock form, the level slider didn't do anything, absolutely no way to adjust voltage, what u put in it was going to the motor...now I can run it on my 12v power supply for...
There's a Demon motor that has this unusual extra feature on the side of the can. It's a removable endbell modified motor, so this feature shouldn't be associated with holding the endbell to the can. Any thoughts what this could be for? I'm...
Last post
Hi,
also i had some old good Power Kings in the Past. Great Motors for the Kyosho Optima and Optima Mids.
Best regards to V12.
Have found now some Power Kings and Twister Motors...
Here is my vintage Simprop radio, made in Germany. Originally this was a 40mHz FM version, as per the box, but when I got it the HF module inside was missing. I've only been able to find a 35mHz unit so far. I think that's a frequency only to be...
Last post
Simprop radios always have had a very good reputation in R/C flight competition. But they were also some of the most expensive.
The Car Profi was the very first radio to use functions as dual rate and servo reverse in car control radios.
BTW this...
Share pics of motors that you particularly like in your collection!
I will start off and share two in my collection that I particularly like simply because they look beautiful (having nothing to do with performance of course). Look at all those...
Last post
Not THE motor, but my best racing memories were with the B&R Magnum. So I was stoked when one came attached to a buggy I picked up a while back. Now it will be on display in a build I am working on (slowly).
20221016_225404.jpg
I recently picked up a nice little Hitec Shredder RCD 75mhz AM receiver, however it's marked AIR so I presume it's tuned for Airtronics. There's no real wiring markings on it and I have no 75mhz AM Airtronics radio. Is there any way to test this...
Last post
That Dynamite MicroPro has old style Airtronics servo sockets, so it should need a Airtronics crystal.
I have two, Futaba and Airtronics versions. The manual says to use crystals that match the transmitter.
Anyone have a idea which vintage motors came with a 13x3 armature? I am building a kinwald XXT and I am in need of a 13x3 armature and cannot wait any longer for integy to get theirs in stock. So figured to get a list together on what motors used...
So I have recently purchased one of these Speed Gems 2 Sapphire motors for a vintage BK1 XXX project i have and noticed that they come at a seemingly higher price than the other Speed Gems motors. Is there a reason for this? Thank you for any help...
Last post
That was my thinking as well is its likely the color
I am being offered access to the inner vault of the Milanesi motor collection. These were never put on public sale and were used for the Italian team drivers only. He has motors complete with names...
In the hunt for good deals I tend to pick up used ESCs and receivers in need of a little rework.
These 2 Novak ESCs needed the standard case cleanups, wiring unsnarling, receiver connector repair, and power switch replacement. For the switches I...
Last post
I like restoring the Novak 410 esc's...once you make a couple bad buys on some not working units, you have spare parts to pretty up working ones, lol.
I've been watching these Tekin 900 dynos sell from $70 up to $300. I found one toward the lower half of that price range and decided to snag it.
.
PXL_20220506_185222984.jpg
.
The manual is here:
My reason for avoiding Tekin peak chargers...
Last post
The Tekin Dyno doesn't seem to like this power supply. The power output keeps cycling between 11.98v and 12.17v and the Dyno test motor keeps increasing and dropping revs. I tried out a 14v 10a Novak N-power supply and I get a good steady motor...
I brought up this idea in someone else's thread, so I'm bringing it up here instead of continuing to de-rail theirs.
Since there's a lot of us folks who buy and/or collect old brushed motors, I thought it might be useful if we had a sticky thread...
Last post
That is precisely correct. :)
What I've found about brushed motors from doing the reference guide is things were very loosely structured in many ways. I wouldn't be surprised if like mentioned, different brands of endbells, cans, etc... were used...
Spotted this as part of a Ultima pro rebuild in an auction site here in New Zealand.
Managed to convince the guy to seperate it and sell it to me.
Going into my JRX-Pro build, not that many vintage 20 plus year old Losi parts around in this country,...
Last post
I have a handful of yellow label and white label Losi Revolution motors. One yellow label and one white label motor does not have what I believe to be the correct original endbells, and it's difficult as all heck to find out exactly what endbells...
I have 3 brushed modified motors and they're all based on the same Epic 5.0 can. Just wondering if there's a name for this generation of motor? Or just Epic 5.0?
This is an interesting one, and I have been looking for one of these for quite some time... even without knowing what they actually looked like.
About a month a good friend of mine was looking to buy an Optima, and in the background of one of the...
Last post
I have finally managed to track down a Century Systems advert for their Marfet iteration. The examples of these I have seen do not appear to have the MFT lettering on the underside of the PCB.
When I was a lad I never had the money to spend on a Dyno and probably never saw the need at my level but now I find myself curious about them , I guess I'm trying to work out how curious in relation to cost !
I have an inductive loop digital amp...
Last post
The amp draw goes hand in hand with temperature increase , its easy to wind on a lot of timing to make a motor run faster but it gets very hot therefore inefficient and the motor cooks and dies , there's a sweet spot with timing where it increases...
Had a cobra comm lathe, trinity motor machine, and several le mans motors years ago, when brushless came on the scene sold it all off! (never sell your cool shit)
Been miserable ever since. At that time i had a new 480t and 360gold, plus some used...
I picked up some old Tamiya stuff and cant seem to get the Tx hooking up with the Rx. Have tried a few variations. The one common is the same set of crystals.
Do they fail after some time?
Last post
Very old thread, I know, but I am new to the site and reading up on old stuff when I should be working :lol: Yes, crystals can go bad. A crystal is just a wafter that vibrates at the frequency indicated when electricity is applied. They don't expire...
Anyone remember Team Ugly quick battery change from late 80s? They were used during oval racing back then and some were simple but effective for under 3 second battery changes. I need some help with better photos of this setup especially the...
I have a need for some of these old style connectors but don't recall the name of them. Is there a source to obtain a few? I have several cars needing them and would like to keep them original as possible.
IMG_20220708_223403.jpg
Last post
Awesome! Thanks for jogging my memory! I think I may have to go with version 1 :shock:
As per title, an early esc by I & D electronics, also responsible for the Spectron lexan car. Haven't had a good look at it yet or tried to see if it works. The Parma motor looks to have been supplied by MG.
It's not overly massive considering it's...
Last post
It has an awesome name! That would be good enough for me. Nice find.
Note, I'm not asking how much something may be worth, I know that's verboten. The title is probably poorly worded. I'm just wondering if there's folks who still like to use old long-antenna crystal-based radios for nostalgia's sake? Personally can't...
Last post
I know someone with some yard tools to offer in trade.
Anybody know anything about old Revtech motors? I've got a mint one, but don't know much about it. It's can is silver and has just a simple Revtech sticker on it. The sticker is clear with Revtech written on it twice. It came in a motor case labeled...
Last post
Pretty sure it's a 19turn triple wind. However, if you have a silver dot with the same can/color motor label, it's a 19 turn double. I've got both, but in all honesty....you never really know what you have until you open the can. It was sooo easy to...
Users browsing this forum: No registered users and 6 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
