This topic will act as a way for me to convey any news regarding the forum that I feel members should be aware of.
Last post
Newly registered members with under 30 posts can no longer PM or email other users. This prevents people from creating accounts for the sole purpose of hassling other members via those methods. They don't have access to the B/S/T section, and...
This is the place to discus the: Ultimate Vintage Brushed Motor Reference Guide
For cleanliness and clarity, it was decided to no longer allow posts to be made in the actual topic itself. The discussion regarding it can be made here instead in...
Last post
I had a Ti Modified 7x2 hanging on my wall for 15 years. 2x I installed it into new cars and both times the cars were so incredibly fast that they rolled and tumbled. One broke.
So the motor was just too powerful. I just kept shelving it. I...
A while back I found a cool thread www.rc10talk.com/viewtopic.php?t=239 started by Scr8p that linked to a timeline Novak had on their website. With Novak updates ending the timeline in 2009, their eventual closure, and wayback links as the only...
Last post
Thanks for clearing up the questions I had for a long time now, with this post.
as of late, there has been a bunch of the same kind of threads being started. guy digs out his old r/c from his parent's attic or basement and now he wants to get it going again with modern electronics. i know for me, i get tired of answering the...
Last post
Thank you for all the info and taking the time to explain it to me Joseph. I'm not 100% set on having him use the vintage one, but I have several, probably 6-8 rollers I got over the years when I saw a good deal. I have lots of back up parts as...
Futaba used to offer these two spec lists for their older discontinued receivers and servos. Now they're only available through the Internet Archives site. That's a bit of a pain. So I decided to edit them a bit, and post them here for easier...
Last post
I see that R142JE is called out in the manual. Somehow I muat have gotten confused about the 152 superseding the 142. Thanks for the measurements.
20 does sound like a good starting point. Just making sure 23 isn't more common.
So what models from the gallery section are your favorites? Post as often as you like. Crediting the builder would be nice, but leaving it as an I Spy type post is cool too. This one will always be in my top 3 all time. Perfection... IMHO :mrgreen:...
Last post
All of them are beautiful. But LoboNYC's DS Pantera is just... jaw dropping.
After receiving a few requests for account closures, it's something I feel needs to be addressed.
Closing your account is not an option. If you no longer have a use for RC10Talk such as leaving the hobby for instance, you say your goodbyes if you...
Here are the pictures I shot of Gene Husting's RC Museum that's in his home:
Last post
I actually acquired Gene's RC12i from Curtis last year. It was not his personal race car but his promotional/marketing car. It is on display at Hobby Action Raceway in Chandler, AZ.
I’ve always been fascinated with R/C cars. I recall having a few low end ones that went forwards and backwards and only turned in reverse. One year for Christmas I got a Shinsei Dust Runner ATC 250 three wheeler. It was digital proportional and was...
It's simple, do not start a thread asking what your item is worth. We are not Antique R/C Car Road Show here to appraise your goods. The answer to What is this worth? is We don't know. Another answer is Whatever someone is willing to pay for it. Do...
This is a how-to that I just posted over at Clodtalk because the site search feature doesn't work. This method works for any site. Hope the info helps.
--------------------
The search feature of this site and others leaves much to be desired. The...
Last post
I do own Macrosoft stuff. Macrosoft? CRAP!!!
No wonder this keyboard was $1.
:lol:
Anyone here into tractor pulling? I have been anxious to get into some sort of local RC competition, but 1:8 buggy racing is out of my skill set, and everything else is just too far away to justify getting into. But, through a FBMP deal this...
Last post
Tabletop pulling has been around since the '70s but you hear/read next to nothing about it these days. Not many people even know it exists. Seems to be predominantly a Midwest thing here in the states. The 'vintage' tabletop pullers were even wilder...
This seems to be a hugely popular thread on another forum out there, so let's see how it do here?!?
Simple, what did you do RC wise today? Pics or it didn't happen! Painted a body, rewired a ESC, mounted some wheels, finished a 3-year project...
Last post
My son and I did some monster trucking this evening. He had the Clod and I had the Mystery Machine. The Clod is a pretty intimidating beast when it comes charging your way! 😂 I did my best not to let the Lunch Box get bullied, but he definitely...
Looking for products to help with my brushed motors I found this
★Clean up your motor commutators with these brushes - around 2 or 3 minutes with battery pack connected will freshen up brushed motor performance. ★Contains two cleaning brushes....
Last post
All of my comm sticks are made from a flexible material, similar to a hard eraser.
The Trinity comm pen was just a fiberglass pen. The same generic type is still available on Amazon.
I live in an area that already gets significantly more rain (+60%) than the national average. On top of that, we've been having record numbers lately (on top of an above average year).
So it hasn't...
Last post
Random PM's from a no poster that assume you're swimming in parts bins like Scrooge MacDuck as you gaze upon library quality shelves upon shelves of new builds and NIB stacks of a particular model of car..
Well, I recently caught the bug after my Dad and I saw the 40th RC10. I just had to have a vintage gold pan too and then the rabbit hole of various editions. I went a little crazy and bought 2 a pretty mint Cadillac and a RC10 Graphite that I think...
Last post
Welcome dude, great buys. Looks like you know how to pick them 8)
Time to start a thread for us genx'rs. If music is not on around my house or vehicle of choice, then I'm probably asleep. Chime in with what your currently listening to. Myself, I'm kinda addicted to concerts on DVD and BluRay. I have about 250...
If you 're looking for yokomo dogfighters, hot dogs or Mugen bulldogs... sorry this tread is just for real life doggies.
for starters, here's ours: Dolly
Shiba just over 1 year, female
relation with radio control cars: exitement when driving...
Last post
Handsome lad ! Double prick eared means a very full on dog ! Best of luck and patience with leaving him alone , I'm sure you know what your doing but going out for just a few min at a time and slowly stretching it , often while there's food down is...
Hello from Frankfurt,
I haven't raced RC for almost 8 years but recently felt the urge to build/restore something from the old days like an RC10.
So here I am, officially a newbie lol
Last post
Welcome on board sir! Look forward to seeing your build(s)!
I am wondering if anyone out there remembers Team Ugly from way back in time for pan cars? I am rebuilding the missing pieces for the pull bar locking tab and battery tray but I am needing some pictures I can reference.
If anyone has...
Last post
Thanks for the link for the Viper build! Sweet looking car and they are not seen often. Ok, now I have a few ideas. I will make a template out of card stock and get it mocked up.
I have an Edinger motor that was working ok. After a week it got slower and slower until it stopped. With Tamiya motors and prewar lionel trains a quick spray with electric contact cleaner usually fixes this. Well after a couple of shots with...
Has anyone taken advantage of the Reedy Upgrade Exchange Program? Looking through their list, all I'm really interested in is swapping out some old (even some new) low-end servos, maybe a motor, maybe an esc. Seems like doing this would be lots...
Last post
I have thought about it but like someone said the reward is almost nothing. I would rather hold on to the parts. You never know when they will come in handy.
Hi RC people. Got back into RC this past year after about 40 years as my kids are about the age I was when I convinced my parents to buy me a used Hornet, which was my pride and joy.
This past year I got Grasshopper->Hornet->Frog->TT02-BR->XV-01....
Last post
The outdrive bearing mod is actually adding bearings in a location that the 6 gear doesn't normally have bearings.
Do you have pictures of this?
Instead of an outer support bearing, each 6 gear outdrive has interal bearings and an outer felt...
Hello, I'm going to be using shorty packs in my vintage 10T's and am looking for a holder that will fit. Drilling the chassis is not ideal, but if that's what works, so be it. I'd rather drill the chassis than cut the bulkhead up. I've searched the...
Thank you for adding me. I looking forward to participating. Been in the hobby for over 30 years with the occasional break from live and ex wives etc lol. I am a Tamiya collector but have always wanted to build an RC10. Recently I was able to pick...
Last post
My workspace has been over run with stuff for a yard sale that has never happened. Hopefully soon we will be able to get my work space back and I can separate my RC Stuff, Reloading stuff, Train stuff and another type of stuff that goes with the...
Hello Everybody. I've been into R/C since I was a kid (80s), but never really got into hobby grade vehicles until the early 90s. I took a long break for about 10 years, got back into it, then took another long break until now.
Just picked up a gold...
Last post
Thanks guys. The JRX2 was an Ebay score from Mr Lexan. I dont know if he is a member here, or not. It is in great shape.
The JRXT was a local find...the guy was cleaning out his garage, and just kept handing me extra stuff to go with it. :D I...
I have had 5 or 6 Schumacher wings in a row with the overspray film on the side where I normally paint. :? On the first one I thought someone must have loaded the lexan into the press upside down by mistake. Then I got another, and another, and...
Last post
I normally use white masking tape, as it still gives you a visual reference for even coverage.
my stuff is constantly evolving and a car is really never completed
but i guess this is as good as place as any to keep tabs on my ever growing changing fleet
and since i just completed my set of associated alum chassis cars ill start with my...
Last post
added 5 new associated cars to the family all with 3d printed chassis
How do you achieve the best results, with lexan scissors (straight or curved), or a sharp hobby knife?
Last post
The bionic eyes and Wolverine claw are an awesome combination. Only gripe is that the magnification starts to give me a headache. But repeatedly cutting in the same score line is something I thought was impossible to do. The magic is real.
....
How do you ship to Australia or New Zealand from the US? Do you just staple the package to a wombat or something? Apparently a couple of guys, presumably both named Bruce , want my Storm 2000.
Last post
How do you ship to Australia or New Zealand from the US? Do you just staple the package to a wombat or something? Apparently a couple of guys, presumably both named Bruce , want my Storm 2000.
We all have big toys too right? Show off your rides! This is one of my big toys I finished it last year after it sat in the garage for almost 9 years. Flashback to the 90's! Lol
Maybe I should show what I started with?
Last post
As a twist to this thread - something I just picked up. A project to keep me from buying more RC cars...
Will be a father/son 'build'. Lots of plans, need to set a realistic budget. Not going crazy with motor, it will be his first car, keeping it...
So I've just completed a recreation of my old vintage hotshot and I went with the original yellow Tamiya CVA shocks for the build as that's the way it was BITD , anyway last weekend I met up with a mate and we went for a bash at a local spot , he...
Last post
Well obviously I am a Brimod guy, so an easy one for me. Nothing beats their look I don’t think, and the bleed screw and threaded spring adjustment is fantastic. They do leak though (although that problem has now been resolved with a subtle mod)....
Admittedly I don't have a lot of unicorn eyelash type stuff. But pretty sure when you can't find the thing for sale anywhere online, you can officially call it rare.
So... what do you think is the rarest R/C part you have?
I like to think the...
Last post
Schumacher Active Caster System for Losi XX.
Was gifted to me last year by a friend who only used it a couple of times back when it came out.
Is there a way to adopt a b4 style top shaft to a 64 pitch for use with a thorp 64pitch gear set? Were the top shafts and idlers for the thorp 64pitch gt and rc10 stealth the same across kits?
-Joseph
Last post
It may be possible to press the gears off and swap them. I'm honestly not 100% sure though.
Are there any threads here on that? Would I just try and torch and hammer off the gear of a associated steel b4 top shaft? Are there any 'blank' b4 shafts?